2000 Dodge Durango Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Dodge Durango, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2000 Durango — Year-Specific Fitment Context
The 2000 Dodge Durango is in year 3 of 7 using the 6x114.3 pattern (1998–2004). Wheels from any 1998–2004 Dodge Durango are cross-compatible with the 2000 model. Across its full production run (1998–2024), the Durango has also used: 5x127, 5x139.7.
Dodge Durango Bolt Pattern by Year
The table below shows how the Durango's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 6x114.3 | 71.6 | 30 |
| 1999 | 6x114.3 | 71.6 | 30 |
| ▸ 2000 | 6x114.3 | 71.6 | 30 |
| 2001 | 6x114.3 | 71.6 | 30 |
| 2002 | 6x114.3 | 71.6 | 30 |
| 2003 | 6x114.3 | 71.6 | 30 |
| 2004 | 6x114.3 | 71.6 | 30 |
| 2005 | 5x139.7 | 78.1 | 35 |
| 2006 | 5x139.7 | 78.1 | 35 |
| 2007 | 5x139.7 | 78.1 | 35 |
| 2008 | 5x139.7 | 78.1 | 35 |
| 2009 | 5x139.7 | 78.1 | 35 |
| 2011 | 5x139.7 | 78.1 | 35 |
| 2012 | 5x127 | 71.6 | 53 |
| 2013 | 5x127 | 71.6 | 53 |
| 2014 | 5x127 | 71.6 | 53 |
| 2015 | 5x127 | 71.6 | 53 |
| 2016 | 5x127 | 71.6 | 53 |
| 2017 | 5x127 | 71.6 | 53 |
| 2018 | 5x127 | 71.6 | 53 |
| 2019 | 5x127 | 71.6 | 53 |
| 2020 | 5x127 | 71.5 | 56 |
| 2021 | 5x127 | 71.5 | 56 |
| 2022 | 5x127 | 71.5 | 56 |
| 2023 | 5x127 | 71.5 | 56 |
| 2024 | 5x127 | 71.5 | 56 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2000 Dodge Durango
For your 2000 Dodge Durango, the 6x114.3 bolt pattern and 71.6mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 30mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: 1/2"-20 UNF thread with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen or damage the wheel. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Dodge Durango appears from 1998 to 2024 (26 model years). Across model years, this model appears with 3 bolt patterns (5x127, 5x139.7, 6x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 26.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95-105 ft-lbs after 50-100 miles, then periodically check.
- ✅ Avoid wheels with offset below 20mm or above 40mm to prevent suspension or brake clearance problems.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 71.6mm; outer diameter must match wheel's hub bore.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Dodge Durango — Frequently Asked Questions
What is the bolt pattern for a 2000 Dodge Durango?
The 2000 Dodge Durango uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 30mm.
What other years of Dodge Durango have the same bolt pattern as the 2000?
The Dodge Durango uses the 6x114.3 pattern from 1998 through 2004. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I use spacers on my 2000 Dodge Durango?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your N 1/2" (20 UNF) hardware.
What is the factory wheel offset for a 2000 Dodge Durango?
The OEM offset for the 2000 Durango is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2000 Dodge Durango use?
The 2000 Dodge Durango uses N 1/2" (20 UNF) lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2000 Dodge?
The 2000 Durango uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset