2009 Dodge Nitro Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Dodge Nitro, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2009 Nitro — Year-Specific Fitment Context
The 2009 Dodge Nitro is in year 3 of 5 using the 5x114.3 pattern (2007–2011). Wheels from any 2007–2011 Dodge Nitro are cross-compatible with the 2009 model.
Dodge Nitro Bolt Pattern by Year
The table below shows how the Nitro's wheel specifications have changed over the years. The 2009 model year is highlighted.
Fitment Notes
The 2009 Dodge Nitro has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Nitro appears from 2007 to 2011 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2009 Dodge Nitro — Frequently Asked Questions
What is the bolt pattern for a 2009 Dodge Nitro?
The 2009 Dodge Nitro uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Dodge Nitro have the same bolt pattern as the 2009?
The Dodge Nitro uses the 5x114.3 pattern from 2007 through 2011. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
Do 2009 Dodge Nitros use lug bolts or lug nuts?
The 2009 Nitro requires N 1/2" hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2009 Dodge Nitro?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2009 Nitro, the PCD is 5x114.3.
What lug nut size does the 2009 Dodge Nitro use?
The 2009 Dodge Nitro uses N 1/2" lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Dodge fit my 2009 Nitro?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Dodge Nitro is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2007-2011 (5 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2009 Dodge Nitro, please report it via our About page contact so we can verify and update this record.