2007 Ferrari 612 Scaglietti Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Ferrari 612 Scaglietti, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 front, 50 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 612 Scaglietti — Year-Specific Fitment Context
The 2007 Ferrari 612 Scaglietti is in year 2 of 6 using the 5x114.3 pattern (2006–2011). Wheels from any 2006–2011 Ferrari 612 Scaglietti are cross-compatible with the 2007 model.
Ferrari 612 Scaglietti Bolt Pattern by Year
The table below shows how the 612 Scaglietti's wheel specifications have changed over the years. The 2007 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 Ferrari 612 Scaglietti
For the 2007 Ferrari 612 Scaglietti, the 5x114.3 bolt pattern is shared with many vehicles, but the 67.1mm center bore is critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibrations. Offset is sensitive: front 42mm, rear 50mm. Deviating more than ±5mm can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (ball seat for factory wheels; aftermarket may require conical or shank-style nuts). Improper lug nut seating can lead to wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Ferrari 612 Scaglietti appears from 2006 to 2011 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 Nm (74 lb-ft) after 50-100 miles of driving.
- ✅ Verify hub-centric ring inner diameter matches 67.1mm; outer diameter must match aftermarket wheel bore.
- ✅ Check inner clearance for brake calipers and suspension when using lower offsets (e.g., 35mm front).
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Ferrari 612 Scaglietti — Frequently Asked Questions
What is the bolt pattern for a 2007 Ferrari 612 Scaglietti?
The 2007 Ferrari 612 Scaglietti uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42 front, 50 rearmm.
What other years of Ferrari 612 Scaglietti have the same bolt pattern as the 2007?
The Ferrari 612 Scaglietti uses the 5x114.3 pattern from 2006 through 2011. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What lug nut size does the 2007 Ferrari 612 Scaglietti use?
The 2007 Ferrari 612 Scaglietti uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2007 Ferrari 612 Scaglietti?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 67.1mm center bore important for the 2007 612 Scaglietti?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2007 Ferrari 612 Scaglietti?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 42 front, 50 rearmm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset