2008 Ferrari 612 Scaglietti Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Ferrari 612 Scaglietti, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 front, 50 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 612 Scaglietti — Year-Specific Fitment Context
The 2008 Ferrari 612 Scaglietti is in year 3 of 6 using the 5x114.3 pattern (2006–2011). Wheels from any 2006–2011 Ferrari 612 Scaglietti are cross-compatible with the 2008 model.
Ferrari 612 Scaglietti Bolt Pattern by Year
The table below shows how the 612 Scaglietti's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Ferrari 612 Scaglietti
For your 2008 Ferrari 612 Scaglietti, the bolt pattern is 5x114.3mm with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load distribution. The offset is sensitive: front 42mm, rear 50mm. Sticking to this range maintains handling and clearance. Safety warning: lug nuts must be 14x1.50 thread pitch with a ball seat (tapered 60-degree) to match Ferrari's factory design. Using incorrect seat type can cause wheel loosening. Always re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Ferrari 612 Scaglietti appears from 2006 to 2011 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 lb-ft after 50 miles of driving to ensure proper seating.
- ✅ Avoid using aftermarket wheels without hub-centric rings; the 67.1mm bore is unique to Ferrari and Maserati.
- ✅ Check inner clearance for brake calipers when using wheels with offset outside the 42-50mm range.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Ferrari 612 Scaglietti — Frequently Asked Questions
What is the bolt pattern for a 2008 Ferrari 612 Scaglietti?
The 2008 Ferrari 612 Scaglietti uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42 front, 50 rearmm.
What other years of Ferrari 612 Scaglietti have the same bolt pattern as the 2008?
The Ferrari 612 Scaglietti uses the 5x114.3 pattern from 2006 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the PCD for a 2008 Ferrari 612 Scaglietti?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 612 Scaglietti, the PCD is 5x114.3.
What lug nut size does the 2008 Ferrari 612 Scaglietti use?
The 2008 Ferrari 612 Scaglietti uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 67.1mm center bore important for the 2008 612 Scaglietti?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2008 Ferrari 612 Scaglietti?
The factory center bore (hub bore) for the 2008 Ferrari 612 Scaglietti is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset