2024 Ferrari SF90 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Ferrari SF90, along with offset and center bore data.
2024 Ferrari SF90 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 SF90 — Year-Specific Fitment Context
The 2024 Ferrari SF90 is in year 4 of 5 using the 5x114.3 pattern (2021–2025). Wheels from any 2021–2025 Ferrari SF90 are cross-compatible with the 2024 model.
Ferrari SF90 Bolt Pattern by Year
The table below shows how the SF90's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 3207 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
2024 Ferrari SF90 — Frequently Asked Questions
What is the bolt pattern for a 2024 Ferrari SF90?
The 2024 Ferrari SF90 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of Ferrari SF90 have the same bolt pattern as the 2024?
The Ferrari SF90 uses the 5x114.3 pattern from 2021 through 2025. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I use spacers on my 2024 Ferrari SF90?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How do I measure the bolt pattern on my 2024 Ferrari?
The 2024 SF90 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2024 Ferrari SF90?
The OEM offset for the 2024 SF90 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Ferrari fit my 2024 SF90?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset