2021 Ferrari SF90 Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Ferrari SF90, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size 14x1.5
Center Bore (CB) 67.1 mm
Offset (ET) 45
Torque Specs 100 ft-lbs (135 Nm)

2021 SF90 — Year-Specific Fitment Context

The 2021 model year marks the beginning of the Ferrari SF90's 5x114.3 bolt pattern era, which continued through 2022 (2 consecutive years). Wheels from any 2021–2022 Ferrari SF90 are cross-compatible with the 2021 model.

Ferrari SF90 Bolt Pattern by Year

The table below shows how the SF90's wheel specifications have changed over the years. The 2021 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2021 5x114.3 67.1 45
2022 5x114.3 67.1 45

Fitment Notes

The 2021 Ferrari SF90 has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Ferrari SF90 appears from 2021 to 2022 (2 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2021 Ferrari SF90 — Frequently Asked Questions

What is the bolt pattern for a 2021 Ferrari SF90?

The 2021 Ferrari SF90 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.

What other years of Ferrari SF90 have the same bolt pattern as the 2021?

The Ferrari SF90 uses the 5x114.3 pattern from 2021 through 2022. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.

How do I measure the bolt pattern on my 2021 Ferrari?

The 2021 SF90 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

How tight should I torque the lug nuts on a 2021 Ferrari SF90?

Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Can I put aftermarket wheels on my 2021 Ferrari SF90?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 67.1mm (using hub rings if larger).

Can I use spacers on my 2021 Ferrari SF90?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Ferrari SF90 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2021 Ferrari SF90, please report it via our About page contact so we can verify and update this record.

Ferrari SF90 By Year

2021 2022

Other Ferrari Models

296 GTB 430 Scuderia 458 Speciale 458 Spider 488 GTB 488 Pista 599 GTB Fiorano 599 GTO 612 Scaglietti 812 Competizione A 812 Superfast California F12berlinetta F430 F8 FF GTC4Lusso Portofino Roma SF90