2022 Ferrari SF90 Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Ferrari SF90, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size 14x1.5
Center Bore (CB) 67.1 mm
Offset (ET) 45
Torque Specs 100 ft-lbs (135 Nm)

2022 SF90 — Year-Specific Fitment Context

The 2022 model year is the final year of the Ferrari SF90's 5x114.3 bolt pattern run (since 2021). Wheels from any 2021–2022 Ferrari SF90 are cross-compatible with the 2022 model.

Ferrari SF90 Bolt Pattern by Year

The table below shows how the SF90's wheel specifications have changed over the years. The 2022 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2021 5x114.3 67.1 45
▸ 2022 5x114.3 67.1 45

Fitment Notes

The 2022 Ferrari SF90 has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Ferrari SF90 appears from 2021 to 2022 (2 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2022 Ferrari SF90 — Frequently Asked Questions

What is the bolt pattern for a 2022 Ferrari SF90?

The 2022 Ferrari SF90 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.

What other years of Ferrari SF90 have the same bolt pattern as the 2022?

The Ferrari SF90 uses the 5x114.3 pattern from 2021 through 2022. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.

Do 2022 Ferrari SF90s use lug bolts or lug nuts?

The 2022 SF90 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What is the factory wheel offset for a 2022 Ferrari SF90?

The OEM offset for the 2022 SF90 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Can I put aftermarket wheels on my 2022 Ferrari SF90?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 67.1mm (using hub rings if larger).

Why is matching the 67.1mm center bore important for the 2022 SF90?

The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Ferrari SF90 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2022 Ferrari SF90, please report it via our About page contact so we can verify and update this record.

Ferrari SF90 By Year

2021 2022

Other Ferrari Models

430 Scuderia 458 Italia 458 Speciale 458 Spider 488 GTB 488 Pista 599 GTB Fiorano 599 GTO 612 Scaglietti 812 Competizione A 812 GTS 812 Superfast California F12berlinetta F430 F8 FF GTC4Lusso Roma SF90