2026 Ferrari SF90 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ferrari SF90 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45, and utilizes 14x1.5 (Ball seat, 22mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2026 Ferrari SF90 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 SF90 — Year-Specific Fitment Context
The 2026 model year is the final year of the Ferrari SF90's 5x114.3 bolt pattern run (since 2021). Wheels from any 2021–2026 Ferrari SF90 are cross-compatible with the 2026 model.
Ferrari SF90 Bolt Pattern by Year
Looking for all generations? View the complete Ferrari SF90 (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the SF90's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Ferrari SF90 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Ferrari SF90, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2022 Maserati Quattroporte | 67.1 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2008 MAZDA B-Series Extended Cab | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
| 2008 MAZDA B-Series Regular Cab | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
| 2021 MAZDA CX-3 | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
| 2025 MAZDA CX-30 | 67.1 mm (Exact) | 45-50 | 12x1.5 (Flat) |
| 2025 MAZDA CX-5 | 67.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Mercury Grand Marquis | 70.5 mm | 70.5mm → 67.1mm |
0-40 |
| 2003 Mercury Sable | 70.5 mm | 70.5mm → 67.1mm |
40 |
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 67.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Ferrari SF90 — Frequently Asked Questions
What is the bolt pattern for a 2026 Ferrari SF90?
The 2026 Ferrari SF90 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of Ferrari SF90 have the same bolt pattern as the 2026?
The Ferrari SF90 uses the 5x114.3 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Will wheels from another Ferrari fit my 2026 SF90?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the factory wheel offset for a 2026 Ferrari SF90?
The OEM offset for the 2026 SF90 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2026 Ferrari?
The 2026 SF90 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2026 Ferrari SF90s use lug bolts or lug nuts?
The 2026 SF90 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →