1996 Ford Econoline E250 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Ford Econoline E250 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1996 Econoline E250 Cargo — Year-Specific Fitment Context
The 1996 Ford Econoline E250 Cargo is in year 5 of 11 using the 8x165.1 pattern (1992–2002). Wheels from any 1992–2002 Ford Econoline E250 Cargo are cross-compatible with the 1996 model.
Ford Econoline E250 Cargo Bolt Pattern by Year
The table below shows how the Econoline E250 Cargo's wheel specifications have changed over the years. The 1996 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 8x165.1 | 124.9 | 0-15mm |
| 1993 | 8x165.1 | 124.9 | 0-15mm |
| 1994 | 8x165.1 | 124.9 | 0-15mm |
| 1995 | 8x165.1 | 124.9 | 0-15mm |
| ▸ 1996 | 8x165.1 | 124.9 | 0-15mm |
| 1997 | 8x165.1 | 124.9 | 0-15mm |
| 1998 | 8x165.1 | 124.9 | 0-15mm |
| 1999 | 8x165.1 | 124.9 | 0-15mm |
| 2000 | 8x165.1 | 124.9 | 0-15mm |
| 2001 | 8x165.1 | 124.9 | 0-15mm |
| 2002 | 8x165.1 | 124.9 | 0-15mm |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1996 Ford Econoline E250 Cargo
For your 1996 Ford Econoline E250 Cargo, the 8x165.1 bolt pattern is shared with 1992–2002 models, ensuring cross-compatibility. The 124.9mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and stress on lug nuts. Offset must stay within 0-15mm; deviations risk rubbing or poor handling. Always use 9/16" lug nuts with the correct thread pitch (likely 9/16-18) and ensure they match the wheel's seat type (cone or ball). Improper seating can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Econoline E250 Cargo appears from 1992 to 2002 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140-165 ft-lbs after 50-100 miles.
- ✅ Verify aftermarket wheels include hub-centric rings for 124.9mm bore.
- ✅ Check that lug nuts are 9/16-18 thread with correct seat (cone for steel, ball for some alloys).
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Ford Econoline E250 Cargo — Frequently Asked Questions
What is the bolt pattern for a 1996 Ford Econoline E250 Cargo?
The 1996 Ford Econoline E250 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford Econoline E250 Cargo have the same bolt pattern as the 1996?
The Ford Econoline E250 Cargo uses the 8x165.1 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1996 Ford Econoline E250 Cargo?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 0-15mmmm, and a center bore of at least 124.9mm (using hub rings if larger).
How do I measure the bolt pattern on my 1996 Ford?
The 1996 Econoline E250 Cargo uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 124.9mm center bore important for the 1996 Econoline E250 Cargo?
The 124.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 1996 Ford Econoline E250 Cargo use?
The 1996 Ford Econoline E250 Cargo uses 9/16 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset