1999 Ford Econoline E250 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Ford Econoline E250 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1999 Econoline E250 Cargo — Year-Specific Fitment Context
The 1999 Ford Econoline E250 Cargo is in year 8 of 11 using the 8x165.1 pattern (1992–2002). Wheels from any 1992–2002 Ford Econoline E250 Cargo are cross-compatible with the 1999 model.
Ford Econoline E250 Cargo Bolt Pattern by Year
The table below shows how the Econoline E250 Cargo's wheel specifications have changed over the years. The 1999 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 8x165.1 | 124.9 | 0-15mm |
| 1993 | 8x165.1 | 124.9 | 0-15mm |
| 1994 | 8x165.1 | 124.9 | 0-15mm |
| 1995 | 8x165.1 | 124.9 | 0-15mm |
| 1996 | 8x165.1 | 124.9 | 0-15mm |
| 1997 | 8x165.1 | 124.9 | 0-15mm |
| 1998 | 8x165.1 | 124.9 | 0-15mm |
| ▸ 1999 | 8x165.1 | 124.9 | 0-15mm |
| 2000 | 8x165.1 | 124.9 | 0-15mm |
| 2001 | 8x165.1 | 124.9 | 0-15mm |
| 2002 | 8x165.1 | 124.9 | 0-15mm |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1999 Ford Econoline E250 Cargo
For your 1999 Ford Econoline E250 Cargo, the bolt pattern is 8x165.1mm with a center bore of 124.9mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 0-15mm; staying within this range maintains correct suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (9/16-18) and seat type (conical/ball seat) to avoid wheel loosening. Mismatched seats can cause dangerous failures. Verify that wheels from 1992-2002 Econoline models are cross-compatible, but always test fit for clearance.
Historical Fitment Data Reference
In our dataset, Ford Econoline E250 Cargo appears from 1992 to 2002 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore smaller than 124.9mm; they will not fit without machining.
- ✅ Check for brake caliper clearance, especially with aftermarket wheels, as the E250 has large brakes.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Ford Econoline E250 Cargo — Frequently Asked Questions
What is the bolt pattern for a 1999 Ford Econoline E250 Cargo?
The 1999 Ford Econoline E250 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford Econoline E250 Cargo have the same bolt pattern as the 1999?
The Ford Econoline E250 Cargo uses the 8x165.1 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1999 Ford Econoline E250 Cargo?
Refer to your owner's manual for exact specs, but always tighten the 9/16 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 124.9mm center bore important for the 1999 Econoline E250 Cargo?
The 124.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 1999 Ford Econoline E250 Cargo use?
The 1999 Ford Econoline E250 Cargo uses 9/16 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 1999 Ford Econoline E250 Cargo?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your 9/16 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset