2002 Ford Econoline E250 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Ford Econoline E250 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2002 Econoline E250 Cargo — Year-Specific Fitment Context
The 2002 model year is the final year of the Ford Econoline E250 Cargo's 8x165.1 bolt pattern run (since 1992). Wheels from any 1992–2002 Ford Econoline E250 Cargo are cross-compatible with the 2002 model.
Ford Econoline E250 Cargo Bolt Pattern by Year
The table below shows how the Econoline E250 Cargo's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 8x165.1 | 124.9 | 0-15mm |
| 1993 | 8x165.1 | 124.9 | 0-15mm |
| 1994 | 8x165.1 | 124.9 | 0-15mm |
| 1995 | 8x165.1 | 124.9 | 0-15mm |
| 1996 | 8x165.1 | 124.9 | 0-15mm |
| 1997 | 8x165.1 | 124.9 | 0-15mm |
| 1998 | 8x165.1 | 124.9 | 0-15mm |
| 1999 | 8x165.1 | 124.9 | 0-15mm |
| 2000 | 8x165.1 | 124.9 | 0-15mm |
| 2001 | 8x165.1 | 124.9 | 0-15mm |
| ▸ 2002 | 8x165.1 | 124.9 | 0-15mm |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2002 Ford Econoline E250 Cargo
For your 2002 Ford Econoline E250 Cargo, the bolt pattern is 8x165.1mm with a center bore of 124.9mm. When selecting aftermarket wheels, hub-centric rings are essential to ensure the wheel centers properly on the hub, preventing vibrations. The offset range is 0-15mm; staying within this range maintains proper suspension geometry and tire clearance. Always use lug nuts with the correct thread pitch (9/16-18) and seat type—either conical (60-degree) or ball seat, matching the wheel's specifications. Improper lug nuts can lead to wheel loosening. Verify that the wheel's load rating meets or exceeds the vehicle's requirements, especially for cargo use.
Historical Fitment Data Reference
In our dataset, Ford Econoline E250 Cargo appears from 1992 to 2002 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a smaller center bore; they will not fit over the hub.
- ✅ Check for clearance between the wheel spokes and brake calipers, as aftermarket designs may interfere.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Ford Econoline E250 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2002 Ford Econoline E250 Cargo?
The 2002 Ford Econoline E250 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford Econoline E250 Cargo have the same bolt pattern as the 2002?
The Ford Econoline E250 Cargo uses the 8x165.1 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What does 0-15mmmm offset mean for the 2002 Econoline E250 Cargo?
An offset of 0-15mmmm means the wheel's mounting surface is 0-15mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Can I use spacers on my 2002 Ford Econoline E250 Cargo?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your 9/16 hardware.
What is the center bore of a 2002 Ford Econoline E250 Cargo?
The factory center bore (hub bore) for the 2002 Ford Econoline E250 Cargo is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 124.9mm center bore important for the 2002 Econoline E250 Cargo?
The 124.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset