2000 Ford Econoline E250 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Ford Econoline E250 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
2000 Econoline E250 Cargo — Year-Specific Fitment Context
The 2000 Ford Econoline E250 Cargo is in year 9 of 11 using the 8x165.1 pattern (1992–2002). Wheels from any 1992–2002 Ford Econoline E250 Cargo are cross-compatible with the 2000 model.
Ford Econoline E250 Cargo Bolt Pattern by Year
The table below shows how the Econoline E250 Cargo's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 8x165.1 | 124.9 | 0-15mm |
| 1993 | 8x165.1 | 124.9 | 0-15mm |
| 1994 | 8x165.1 | 124.9 | 0-15mm |
| 1995 | 8x165.1 | 124.9 | 0-15mm |
| 1996 | 8x165.1 | 124.9 | 0-15mm |
| 1997 | 8x165.1 | 124.9 | 0-15mm |
| 1998 | 8x165.1 | 124.9 | 0-15mm |
| 1999 | 8x165.1 | 124.9 | 0-15mm |
| ▸ 2000 | 8x165.1 | 124.9 | 0-15mm |
| 2001 | 8x165.1 | 124.9 | 0-15mm |
| 2002 | 8x165.1 | 124.9 | 0-15mm |
Fitment Notes
The 2000 Ford Econoline E250 Cargo has a bolt pattern of 8x165.1.
Imperial Conversion: This bolt pattern is commonly referred to as 8x6.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 8x6.5".
This means it is a 8 lug pattern with a circle diameter of 165.1mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Econoline E250 Cargo appears from 1992 to 2002 (11 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
2000 Ford Econoline E250 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2000 Ford Econoline E250 Cargo?
The 2000 Ford Econoline E250 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford Econoline E250 Cargo have the same bolt pattern as the 2000?
The Ford Econoline E250 Cargo uses the 8x165.1 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What is the factory wheel offset for a 2000 Ford Econoline E250 Cargo?
The OEM offset for the 2000 Econoline E250 Cargo is typically around 0-15mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2000 Ford?
The 2000 Econoline E250 Cargo uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2000 Ford Econoline E250 Cargo?
The factory center bore (hub bore) for the 2000 Ford Econoline E250 Cargo is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2000 Ford Econoline E250 Cargos use lug bolts or lug nuts?
The 2000 Econoline E250 Cargo requires 9/16 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Econoline E250 Cargo is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-2002 (11 model years).
- Observed bolt-pattern variants: 1 (8x165.1).
- Observed total offset span across years: 15.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Ford Econoline E250 Cargo, please report it via our About page contact so we can verify and update this record.