1993 Ford F350 Super Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Ford F350 Super Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 18 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0 |
| Torque Specs | 140 ft-lbs (190 Nm) |
1993 F350 Super Cab — Year-Specific Fitment Context
The 1993 Ford F350 Super Cab is in year 2 of 6 using the 8x165.1 pattern (1992–1997). Wheels from any 1992–1997 Ford F350 Super Cab are cross-compatible with the 1993 model.
Ford F350 Super Cab Bolt Pattern by Year
The table below shows how the F350 Super Cab's wheel specifications have changed over the years. The 1993 model year is highlighted.
Fitment Notes
The 1993 Ford F350 Super Cab has a bolt pattern of 8x165.1.
Imperial Conversion: This bolt pattern is commonly referred to as 8x6.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 8x6.5".
This means it is a 8 lug pattern with a circle diameter of 165.1mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford F350 Super Cab appears from 1992 to 1997 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
1993 Ford F350 Super Cab — Frequently Asked Questions
What is the bolt pattern for a 1993 Ford F350 Super Cab?
The 1993 Ford F350 Super Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0mm.
What other years of Ford F350 Super Cab have the same bolt pattern as the 1993?
The Ford F350 Super Cab uses the 8x165.1 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What is the PCD for a 1993 Ford F350 Super Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 F350 Super Cab, the PCD is 8x165.1.
How tight should I torque the lug nuts on a 1993 Ford F350 Super Cab?
Refer to your owner's manual for exact specs, but always tighten the 9/16 18 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Ford fit my 1993 F350 Super Cab?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
How do I measure the bolt pattern on my 1993 Ford?
The 1993 F350 Super Cab uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford F350 Super Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1997 (6 model years).
- Observed bolt-pattern variants: 1 (8x165.1).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1993 Ford F350 Super Cab, please report it via our About page contact so we can verify and update this record.