2009 Ford F350 Super Duty Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Ford F350 Super Duty Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2009 F350 Super Duty Regular Cab — Year-Specific Fitment Context
The 2009 Ford F350 Super Duty Regular Cab is in year 11 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F350 Super Duty Regular Cab are cross-compatible with the 2009 model.
Ford F350 Super Duty Regular Cab Bolt Pattern by Year
The table below shows how the F350 Super Duty Regular Cab's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 124.9 | 40 |
| 2000 | 8x170 | 124.9 | 40 |
| 2001 | 8x170 | 124.9 | 40 |
| 2002 | 8x170 | 124.9 | 40 |
| 2003 | 8x170 | 124.9 | 40 |
| 2004 | 8x170 | 124.9 | 40 |
| 2005 | 8x170 | 124.9 | 40 |
| 2006 | 8x170 | 124.9 | 40 |
| 2007 | 8x170 | 124.9 | 40 |
| 2008 | 8x170 | 124.9 | 40 |
| ▸ 2009 | 8x170 | 124.9 | 40 |
| 2010 | 8x170 | 124.9 | 40 |
| 2011 | 8x170 | 124.9 | 40 |
| 2012 | 8x170 | 124.9 | 40 |
| 2013 | 8x170 | 124.9 | 40 |
| 2014 | 8x170 | 124.9 | 40 |
| 2015 | 8x170 | 124.9 | 40 |
| 2016 | 8x170 | 124.9 | 40 |
| 2017 | 8x170 | 124.9 | 40 |
| 2018 | 8x170 | 124.9 | 40 |
| 2019 | 8x170 | 124.9 | 40 |
| 2021 | 8x170 | 124.9 | 40 |
| 2022 | 8x170 | 124.9 | 40 |
| 2024 | 8x170 | 124.9 | 40 |
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2009 Ford F350 Super Duty Regular Cab
For your 2009 Ford F350 Super Duty Regular Cab, the 8x170 bolt pattern is shared with all 1999–2024 models, ensuring cross-compatibility. However, the 124.9mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; stock is around 40mm. Deviating more than ±10mm may cause rubbing or clearance issues with brakes and suspension. Always verify lug nut thread pitch (14x1.5) and seat type—use conical (60-degree) or ball-seat nuts as specified. Never mix seat types; improper engagement can lead to wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford F350 Super Duty Regular Cab appears from 1999 to 2024 (24 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 165 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid using aftermarket wheels without hub-centric rings; the 124.9mm bore is specific and mismatch causes vibration.
- ✅ Check wheel backspacing: stock is about 4.5 inches; deeper offset may contact brake calipers on this model.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Ford F350 Super Duty Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2009 Ford F350 Super Duty Regular Cab?
The 2009 Ford F350 Super Duty Regular Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 40mm.
What other years of Ford F350 Super Duty Regular Cab have the same bolt pattern as the 2009?
The Ford F350 Super Duty Regular Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2009 Ford?
The 2009 F350 Super Duty Regular Cab uses a 8x170 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 40mm offset mean for the 2009 F350 Super Duty Regular Cab?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Do 2009 Ford F350 Super Duty Regular Cabs use lug bolts or lug nuts?
The 2009 F350 Super Duty Regular Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Ford fit my 2009 F350 Super Duty Regular Cab?
Only if they share the exact same 8x170 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset