2019 Ford F350 Super Duty Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Ford F350 Super Duty Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2019 F350 Super Duty Regular Cab — Year-Specific Fitment Context
The 2019 Ford F350 Super Duty Regular Cab is in year 21 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F350 Super Duty Regular Cab are cross-compatible with the 2019 model.
Ford F350 Super Duty Regular Cab Bolt Pattern by Year
The table below shows how the F350 Super Duty Regular Cab's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 124.9 | 40 |
| 2000 | 8x170 | 124.9 | 40 |
| 2001 | 8x170 | 124.9 | 40 |
| 2002 | 8x170 | 124.9 | 40 |
| 2003 | 8x170 | 124.9 | 40 |
| 2004 | 8x170 | 124.9 | 40 |
| 2005 | 8x170 | 124.9 | 40 |
| 2006 | 8x170 | 124.9 | 40 |
| 2007 | 8x170 | 124.9 | 40 |
| 2008 | 8x170 | 124.9 | 40 |
| 2009 | 8x170 | 124.9 | 40 |
| 2010 | 8x170 | 124.9 | 40 |
| 2011 | 8x170 | 124.9 | 40 |
| 2012 | 8x170 | 124.9 | 40 |
| 2013 | 8x170 | 124.9 | 40 |
| 2014 | 8x170 | 124.9 | 40 |
| 2015 | 8x170 | 124.9 | 40 |
| 2016 | 8x170 | 124.9 | 40 |
| 2017 | 8x170 | 124.9 | 40 |
| 2018 | 8x170 | 124.9 | 40 |
| ▸ 2019 | 8x170 | 124.9 | 40 |
| 2021 | 8x170 | 124.9 | 40 |
| 2022 | 8x170 | 124.9 | 40 |
| 2024 | 8x170 | 124.9 | 40 |
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2019 Ford F350 Super Duty Regular Cab
For your 2019 Ford F350 Super Duty Regular Cab, the 8x170 bolt pattern is shared across 1999–2024 models, ensuring broad cross-compatibility. However, the 124.9mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive; the factory spec is around 40mm. Sticking close to this range maintains proper scrub radius and suspension geometry. Deviating too far can cause tire rubbing or bearing stress. Always verify lug nut thread pitch (14x1.5) and seat type—factory uses a cone seat. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. For safety, re-torque after 50–100 miles and check periodically.
Historical Fitment Data Reference
In our dataset, Ford F350 Super Duty Regular Cab appears from 1999 to 2024 (24 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 165 ft-lbs after 50 miles of driving, then re-check every 5,000 miles.
- ✅ Avoid wheels with a center bore larger than 124.9mm unless you install hub-centric rings; plastic rings are fine for street use, but aluminum are better for towing.
- ✅ When changing offset, measure clearance to the brake calipers and suspension components; a 0–10mm change is typically safe, but more may require spacers or trimming.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Ford F350 Super Duty Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2019 Ford F350 Super Duty Regular Cab?
The 2019 Ford F350 Super Duty Regular Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 40mm.
What other years of Ford F350 Super Duty Regular Cab have the same bolt pattern as the 2019?
The Ford F350 Super Duty Regular Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2019 Ford?
The 2019 F350 Super Duty Regular Cab uses a 8x170 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2019 Ford F350 Super Duty Regular Cab?
The OEM offset for the 2019 F350 Super Duty Regular Cab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2019 Ford F350 Super Duty Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2019 Ford F350 Super Duty Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 F350 Super Duty Regular Cab, the PCD is 8x170.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset