2019 Ford F350 Super Duty Super Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Ford F350 Super Duty Super Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2019 F350 Super Duty Super Cab — Year-Specific Fitment Context
The 2019 Ford F350 Super Duty Super Cab is in year 21 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F350 Super Duty Super Cab are cross-compatible with the 2019 model.
Ford F350 Super Duty Super Cab Bolt Pattern by Year
The table below shows how the F350 Super Duty Super Cab's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 124.9 | 40 |
| 2000 | 8x170 | 124.9 | 40 |
| 2001 | 8x170 | 124.9 | 40 |
| 2002 | 8x170 | 124.9 | 40 |
| 2003 | 8x170 | 124.9 | 40 |
| 2004 | 8x170 | 124.9 | 40 |
| 2005 | 8x170 | 124.9 | 40 |
| 2006 | 8x170 | 124.9 | 40 |
| 2007 | 8x170 | 124.9 | 40 |
| 2008 | 8x170 | 124.9 | 40 |
| 2009 | 8x170 | 124.9 | 40 |
| 2010 | 8x170 | 124.9 | 40 |
| 2011 | 8x170 | 124.9 | 40 |
| 2012 | 8x170 | 124.9 | 40 |
| 2013 | 8x170 | 124.9 | 40 |
| 2014 | 8x170 | 124.9 | 40 |
| 2015 | 8x170 | 124.9 | 40 |
| 2016 | 8x170 | 124.9 | 40 |
| 2017 | 8x170 | 124.9 | 40 |
| 2018 | 8x170 | 124.9 | 40 |
| ▸ 2019 | 8x170 | 124.9 | 40 |
| 2020 | 8x170 | 124.9 | 40 |
| 2021 | 8x170 | 124.9 | 40 |
| 2022 | 8x170 | 124.9 | 40 |
| 2024 | 8x170 | 124.9 | 40 |
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2019 Ford F350 Super Duty Super Cab
For the 2019 Ford F350 Super Duty Super Cab, the 8x170 bolt pattern is shared with all 1999–2024 models, ensuring broad cross-compatibility. However, the 124.9mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive; the factory spec is around 40mm, and deviations beyond ±10mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type—use only conical (60-degree) or ball-seat nuts as specified. Never mix seat types, as improper engagement can lead to wheel loss. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Ford F350 Super Duty Super Cab appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 165 ft-lbs after 50–100 miles of driving to account for settling.
- ✅ Avoid wheels with offset below 30mm or above 50mm to prevent fender rubbing or brake caliper contact.
- ✅ If using aftermarket wheels, always install hub-centric rings (124.9mm ID) to eliminate vibration and center the wheel properly.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Ford F350 Super Duty Super Cab — Frequently Asked Questions
What is the bolt pattern for a 2019 Ford F350 Super Duty Super Cab?
The 2019 Ford F350 Super Duty Super Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 40mm.
What other years of Ford F350 Super Duty Super Cab have the same bolt pattern as the 2019?
The Ford F350 Super Duty Super Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What does 40mm offset mean for the 2019 F350 Super Duty Super Cab?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What is the PCD for a 2019 Ford F350 Super Duty Super Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 F350 Super Duty Super Cab, the PCD is 8x170.
Can I use spacers on my 2019 Ford F350 Super Duty Super Cab?
Yes, but ensure the wheel spacers match the 8x170 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the factory wheel offset for a 2019 Ford F350 Super Duty Super Cab?
The OEM offset for the 2019 F350 Super Duty Super Cab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset