2017 Ford Transit Connect Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Ford Transit Connect Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x160 |
|---|---|
| Lug Nut / Bolt Size | N 14x2.00 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2017 Transit Connect Passenger — Year-Specific Fitment Context
The 2017 Ford Transit Connect Passenger is in year 8 of 9 using the 5x160 pattern (2010–2018). Wheels from any 2010–2018 Ford Transit Connect Passenger are cross-compatible with the 2017 model. Across its full production run (2010–2019), the Transit Connect Passenger has also used: 5x108.
Ford Transit Connect Passenger Bolt Pattern by Year
The table below shows how the Transit Connect Passenger's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x160 Pattern Context
This bolt pattern appears on 80 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x160:
Expert Buying Guide for 2017 Ford Transit Connect Passenger
The 2017 Ford Transit Connect Passenger uses a 5x160 bolt pattern with a 65.1mm center bore and 60mm offset. When selecting aftermarket wheels, hub-centric rings (65.1mm to aftermarket bore) are mandatory to prevent vibration and ensure proper load distribution. The offset is sensitive: staying within ±5mm of 60mm is recommended to avoid rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (14x2.00) and seat type (cone seat, 60-degree taper). Ball seat or incorrect thread pitch can cause wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Transit Connect Passenger appears from 2010 to 2019 (10 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x160).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100-110 ft-lbs after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore at least 65.1mm; use hub-centric rings if larger.
- ✅ Avoid wheels with offset below 55mm to prevent tire rubbing on suspension components.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Ford Transit Connect Passenger — Frequently Asked Questions
What is the bolt pattern for a 2017 Ford Transit Connect Passenger?
The 2017 Ford Transit Connect Passenger uses a 5x160 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 60mm.
What other years of Ford Transit Connect Passenger have the same bolt pattern as the 2017?
The Ford Transit Connect Passenger uses the 5x160 pattern from 2010 through 2018. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2017 Ford Transit Connect Passenger?
Refer to your owner's manual for exact specs, but always tighten the N 14x2.00 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2017 Ford Transit Connect Passenger use?
The 2017 Ford Transit Connect Passenger uses N 14x2.00 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2017 Ford Transit Connect Passenger?
Yes, but ensure the wheel spacers match the 5x160 bolt pattern and 65.1mm center bore. Also verify that you have enough thread engagement for your N 14x2.00 hardware.
Why is matching the 65.1mm center bore important for the 2017 Transit Connect Passenger?
The 65.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset