2012 Honda Crosstour Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Honda Crosstour, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 40-55mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2012 Crosstour — Year-Specific Fitment Context
The 2012 model year marks the beginning of the Honda Crosstour's 5x114.3 bolt pattern era, which continued through 2015 (4 consecutive years). Wheels from any 2012–2015 Honda Crosstour are cross-compatible with the 2012 model.
Honda Crosstour Bolt Pattern by Year
The table below shows how the Crosstour's wheel specifications have changed over the years. The 2012 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2012 Honda Crosstour
The 2012 Honda Crosstour uses a 5x114.3 bolt pattern with a 64.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to ensure proper load distribution and prevent vibrations. The offset range is 40-55mm; staying within this range maintains suspension geometry and avoids rubbing. Always use lug nuts with M12x1.5 thread pitch and the correct seat type—either conical (60-degree) or ball seat—to match the wheel. Incorrect lug nuts can cause wheel loosening or damage. Verify that aftermarket wheels are hub-centric or use rings, and double-check offset to avoid clearance issues with brakes or fenders.
Historical Fitment Data Reference
In our dataset, Honda Crosstour appears from 2012 to 2015 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a smaller center bore than 64.1mm; they won't fit without machining.
- ✅ If using aftermarket wheels, confirm they are compatible with the Crosstour's TPMS sensors.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Honda Crosstour — Frequently Asked Questions
What is the bolt pattern for a 2012 Honda Crosstour?
The 2012 Honda Crosstour uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 40-55mmmm.
What other years of Honda Crosstour have the same bolt pattern as the 2012?
The Honda Crosstour uses the 5x114.3 pattern from 2012 through 2015. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2012 Honda Crosstour?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 64.1mm center bore important for the 2012 Crosstour?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2012 Honda Crosstour?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40-55mmmm, and a center bore of at least 64.1mm (using hub rings if larger).
What is the center bore of a 2012 Honda Crosstour?
The factory center bore (hub bore) for the 2012 Honda Crosstour is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset