2014 Honda Crosstour Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Honda Crosstour, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 40-55mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Crosstour — Year-Specific Fitment Context
The 2014 Honda Crosstour is in year 3 of 4 using the 5x114.3 pattern (2012–2015). Wheels from any 2012–2015 Honda Crosstour are cross-compatible with the 2014 model.
Honda Crosstour Bolt Pattern by Year
The table below shows how the Crosstour's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Honda Crosstour
The 2014 Honda Crosstour uses a 5x114.3 bolt pattern with a 64.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The offset range is 40-55mm; staying within this range maintains suspension geometry and prevents rubbing. Always use M12x1.5 lug nuts with the correct seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Using the wrong seat can cause lug nut loosening or wheel damage. Verify lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, Honda Crosstour appears from 2012 to 2015 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check wheel clearance with the brake calipers and suspension components, especially with wider or lower offset wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Honda Crosstour — Frequently Asked Questions
What is the bolt pattern for a 2014 Honda Crosstour?
The 2014 Honda Crosstour uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 40-55mmmm.
What other years of Honda Crosstour have the same bolt pattern as the 2014?
The Honda Crosstour uses the 5x114.3 pattern from 2012 through 2015. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Will wheels from another Honda fit my 2014 Crosstour?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Why is matching the 64.1mm center bore important for the 2014 Crosstour?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2014 Honda Crosstours use lug bolts or lug nuts?
The 2014 Crosstour requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2014 Honda Crosstour?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Crosstour, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset