2015 Honda Crosstour Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Honda Crosstour, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size M12x1.5
Center Bore (CB) 64.1 mm
Offset (ET) 40-55mm
Torque Specs 80 ft-lbs (108 Nm)

2015 Crosstour — Year-Specific Fitment Context

The 2015 model year is the final year of the Honda Crosstour's 5x114.3 bolt pattern run (since 2012). Wheels from any 2012–2015 Honda Crosstour are cross-compatible with the 2015 model.

Honda Crosstour Bolt Pattern by Year

The table below shows how the Crosstour's wheel specifications have changed over the years. The 2015 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2012 5x114.3 64.1 40-55mm
2013 5x114.3 64.1 40-55mm
2014 5x114.3 64.1 40-55mm
▸ 2015 5x114.3 64.1 40-55mm

Fitment Notes

The 2015 Honda Crosstour has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Honda Crosstour appears from 2012 to 2015 (4 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2015 Honda Crosstour — Frequently Asked Questions

What is the bolt pattern for a 2015 Honda Crosstour?

The 2015 Honda Crosstour uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 40-55mmmm.

What other years of Honda Crosstour have the same bolt pattern as the 2015?

The Honda Crosstour uses the 5x114.3 pattern from 2012 through 2015. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.

What does 40-55mmmm offset mean for the 2015 Crosstour?

An offset of 40-55mmmm means the wheel's mounting surface is 40-55mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Honda.

What is the center bore of a 2015 Honda Crosstour?

The factory center bore (hub bore) for the 2015 Honda Crosstour is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

What is the PCD for a 2015 Honda Crosstour?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2015 Crosstour, the PCD is 5x114.3.

Can I use spacers on my 2015 Honda Crosstour?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Honda Crosstour is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2015 Honda Crosstour, please report it via our About page contact so we can verify and update this record.

Honda Crosstour By Year

2012 2013 2014 2015

Other Honda Models

Accord Crosstour Accord Hybrid CR-V CR-V Hybrid CR-Z Civic Civic Type R Clarity Fuel Cell Clarity Plug-in Hybrid Crosstour Element Fit HR-V Insight Odyssey Passport Pilot Prelude Prologue S2000