1994 Hyundai Excel Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Hyundai Excel, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 Excel — Year-Specific Fitment Context
The 1994 model year is the final year of the Hyundai Excel's 5x114.3 bolt pattern run (since 1992). Wheels from any 1992–1994 Hyundai Excel are cross-compatible with the 1994 model.
Hyundai Excel Bolt Pattern by Year
The table below shows how the Excel's wheel specifications have changed over the years. The 1994 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 Hyundai Excel
For your 1994 Hyundai Excel, the 5x114.3 bolt pattern is shared with 1992-1994 models. The 67.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. Offset must stay within 35-50mm; deviations risk rubbing or bearing damage. Always use 12x1.5 lug nuts with the correct seat type (cone or ball) matching the wheel's design. Improper seating can cause wheel loosening. Verify lug nut torque to spec and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Hyundai Excel appears from 1992 to 1994 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 65-80 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings.
- ✅ Check offset carefully; a 35mm offset may cause inner clearance issues, while 50mm may rub the strut.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Hyundai Excel — Frequently Asked Questions
What is the bolt pattern for a 1994 Hyundai Excel?
The 1994 Hyundai Excel uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Excel have the same bolt pattern as the 1994?
The Hyundai Excel uses the 5x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What is the center bore of a 1994 Hyundai Excel?
The factory center bore (hub bore) for the 1994 Hyundai Excel is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Hyundai fit my 1994 Excel?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I put aftermarket wheels on my 1994 Hyundai Excel?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 1994 Hyundai Excel?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset