2011 Hyundai Genesis Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Hyundai Genesis, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Genesis — Year-Specific Fitment Context
The 2011 Hyundai Genesis is in year 3 of 8 using the 5x114.3 pattern (2009–2016). Wheels from any 2009–2016 Hyundai Genesis are cross-compatible with the 2011 model.
Hyundai Genesis Bolt Pattern by Year
The table below shows how the Genesis's wheel specifications have changed over the years. The 2011 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Hyundai Genesis
For your 2011 Hyundai Genesis, the 5x114.3 bolt pattern is shared with 2009–2016 models, ensuring cross-compatibility. However, the 67.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. Offset is sensitive; the factory 35mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical 60-degree or ball seat as per wheel manufacturer). Improper lug nuts can lead to wheel loosening. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Hyundai Genesis appears from 2009 to 2016 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 67.1mm bore exactly.
- ✅ Avoid spacers unless hub-centric and properly torqued; they alter offset and stress bearings.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Hyundai Genesis — Frequently Asked Questions
What is the bolt pattern for a 2011 Hyundai Genesis?
The 2011 Hyundai Genesis uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35mm.
What other years of Hyundai Genesis have the same bolt pattern as the 2011?
The Hyundai Genesis uses the 5x114.3 pattern from 2009 through 2016. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2011 Hyundai Genesis?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35mm, and a center bore of at least 67.1mm (using hub rings if larger).
Can I use spacers on my 2011 Hyundai Genesis?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How tight should I torque the lug nuts on a 2011 Hyundai Genesis?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2011 Hyundai Genesis?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Genesis, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset