2014 Hyundai Genesis Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Hyundai Genesis, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Genesis — Year-Specific Fitment Context
The 2014 Hyundai Genesis is in year 6 of 8 using the 5x114.3 pattern (2009–2016). Wheels from any 2009–2016 Hyundai Genesis are cross-compatible with the 2014 model.
Hyundai Genesis Bolt Pattern by Year
The table below shows how the Genesis's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Hyundai Genesis
The 2014 Hyundai Genesis uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The recommended offset is 35mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—conical (60-degree) seats are standard for aftermarket wheels, while OEM wheels use ball seats. Mixing seat types can lead to loose wheels and accidents. Verify that aftermarket wheels are hub-centric or use rings, and re-torque lug nuts after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Hyundai Genesis appears from 2009 to 2016 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings.
- ✅ Check for brake caliper clearance when using wheels with offset below 30mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Hyundai Genesis — Frequently Asked Questions
What is the bolt pattern for a 2014 Hyundai Genesis?
The 2014 Hyundai Genesis uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35mm.
What other years of Hyundai Genesis have the same bolt pattern as the 2014?
The Hyundai Genesis uses the 5x114.3 pattern from 2009 through 2016. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the factory wheel offset for a 2014 Hyundai Genesis?
The OEM offset for the 2014 Genesis is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2014 Hyundai?
The 2014 Genesis uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 35mm offset mean for the 2014 Genesis?
An offset of 35mm means the wheel's mounting surface is 35mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Can I use spacers on my 2014 Hyundai Genesis?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset