2022 Hyundai Palisade Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Hyundai Palisade, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 Palisade — Year-Specific Fitment Context
The 2022 Hyundai Palisade is in year 3 of 5 using the 5x114.3 pattern (2020–2024). Wheels from any 2020–2024 Hyundai Palisade are cross-compatible with the 2022 model.
Hyundai Palisade Bolt Pattern by Year
The table below shows how the Palisade's wheel specifications have changed over the years. The 2022 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Hyundai Palisade
The 2022 Hyundai Palisade uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure the wheel is centered on the hub, preventing vibrations and stress on lug studs. The offset range is 35-50mm; staying within this range maintains proper suspension geometry and prevents tire rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat, while aftermarket wheels may require ball or conical seats. Mismatched lug nuts can cause wheel loosening or damage. Verify compatibility with TPMS sensors and brake caliper clearance.
Historical Fitment Data Reference
In our dataset, Hyundai Palisade appears from 2020 to 2024 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and hub damage.
- ✅ Check that aftermarket wheels have adequate clearance for the Palisade's large brake calipers, especially on the front axle.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Hyundai Palisade — Frequently Asked Questions
What is the bolt pattern for a 2022 Hyundai Palisade?
The 2022 Hyundai Palisade uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Palisade have the same bolt pattern as the 2022?
The Hyundai Palisade uses the 5x114.3 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2022 Hyundai?
The 2022 Palisade uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2022 Hyundai Palisade?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Can I use spacers on my 2022 Hyundai Palisade?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the center bore of a 2022 Hyundai Palisade?
The factory center bore (hub bore) for the 2022 Hyundai Palisade is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset