2020 Hyundai Palisade Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Hyundai Palisade, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Palisade — Year-Specific Fitment Context
The 2020 model year marks the beginning of the Hyundai Palisade's 5x114.3 bolt pattern era, which continued through 2024 (5 consecutive years). Wheels from any 2020–2024 Hyundai Palisade are cross-compatible with the 2020 model.
Hyundai Palisade Bolt Pattern by Year
The table below shows how the Palisade's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Hyundai Palisade
The 2020 Hyundai Palisade uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper centering and prevent vibrations. The offset range is 35-50mm; staying within this range avoids rubbing on suspension or fenders. Always use lug nuts with the correct 12x1.5 thread pitch and a conical (60-degree) or ball seat matching the wheel's design. Improper lug nut seating can lead to wheel detachment. Verify that aftermarket wheels have sufficient clearance for the brake calipers, especially on larger rotor packages.
Historical Fitment Data Reference
In our dataset, Hyundai Palisade appears from 2020 to 2024 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a smaller center bore than 67.1mm; they won't fit without machining.
- ✅ Check that aftermarket wheels clear the TPMS sensors and brake calipers; some designs may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Hyundai Palisade — Frequently Asked Questions
What is the bolt pattern for a 2020 Hyundai Palisade?
The 2020 Hyundai Palisade uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Palisade have the same bolt pattern as the 2020?
The Hyundai Palisade uses the 5x114.3 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2020 Hyundai?
The 2020 Palisade uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2020 Hyundai Palisade use?
The 2020 Hyundai Palisade uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2020 Hyundai Palisades use lug bolts or lug nuts?
The 2020 Palisade requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2020 Hyundai Palisade?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Palisade, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset