1996 Hyundai Sonata Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Hyundai Sonata, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1996 Sonata — Year-Specific Fitment Context
The 1996 Hyundai Sonata is in year 5 of 14 using the 4x114.3 pattern (1992–2005). Wheels from any 1992–2005 Hyundai Sonata are cross-compatible with the 1996 model. Across its full production run (1992–2024), the Sonata has also used: 5x114.3.
Hyundai Sonata Bolt Pattern by Year
The table below shows how the Sonata's wheel specifications have changed over the years. The 1996 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 67.1 | 46 |
| 1993 | 4x114.3 | 67.1 | 46 |
| 1994 | 4x114.3 | 67.1 | 46 |
| 1995 | 4x114.3 | 67.1 | 46 |
| ▸ 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 46 |
| 2011 | 5x114.3 | 67.1 | 46 |
| 2012 | 5x114.3 | 67.1 | 35-50 |
| 2013 | 5x114.3 | 67.1 | 35-50 |
| 2014 | 5x114.3 | 67.1 | 35-50 |
| 2015 | 5x114.3 | 67.1 | 35-50 |
| 2016 | 5x114.3 | 67.1 | 35-50 |
| 2017 | 5x114.3 | 67.1 | 35-50 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1996 Hyundai Sonata
For your 1996 Hyundai Sonata, the 4x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure proper load transfer. The stock offset is 46mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use the correct lug nuts: M12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Hyundai Sonata appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles.
- ✅ If using aftermarket wheels, verify hub bore and use hub-centric rings if needed.
- ✅ Avoid wheels with offset below 40mm or above 50mm to prevent fender rubbing or strut contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Hyundai Sonata — Frequently Asked Questions
What is the bolt pattern for a 1996 Hyundai Sonata?
The 1996 Hyundai Sonata uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Hyundai Sonata have the same bolt pattern as the 1996?
The Hyundai Sonata uses the 4x114.3 pattern from 1992 through 2005. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Will wheels from another Hyundai fit my 1996 Sonata?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does 46mm offset mean for the 1996 Sonata?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What is the PCD for a 1996 Hyundai Sonata?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1996 Sonata, the PCD is 4x114.3.
What lug nut size does the 1996 Hyundai Sonata use?
The 1996 Hyundai Sonata uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset