2001 Hyundai Tiburon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Hyundai Tiburon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Tiburon — Year-Specific Fitment Context
The 2001 Hyundai Tiburon is in year 5 of 12 using the 5x114.3 pattern (1997–2008). Wheels from any 1997–2008 Hyundai Tiburon are cross-compatible with the 2001 model.
Hyundai Tiburon Bolt Pattern by Year
The table below shows how the Tiburon's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x114.3 | 67.1 | 35-50 |
| 1998 | 5x114.3 | 67.1 | 35-50 |
| 1999 | 5x114.3 | 67.1 | 35-50 |
| 2000 | 5x114.3 | 67.1 | 35-50 |
| ▸ 2001 | 5x114.3 | 67.1 | 35-50 |
| 2003 | 5x114.3 | 67.1 | 35-50 |
| 2004 | 5x114.3 | 67.1 | 35-50 |
| 2005 | 5x114.3 | 67.1 | 35-50 |
| 2006 | 5x114.3 | 67.1 | 35-50 |
| 2007 | 5x114.3 | 67.1 | 35-50 |
| 2008 | 5x114.3 | 67.1 | 35-50 |
Fitment Notes
The 2001 Hyundai Tiburon has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Hyundai Tiburon appears from 1997 to 2008 (11 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2001 Hyundai Tiburon — Frequently Asked Questions
What is the bolt pattern for a 2001 Hyundai Tiburon?
The 2001 Hyundai Tiburon uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Tiburon have the same bolt pattern as the 2001?
The Hyundai Tiburon uses the 5x114.3 pattern from 1997 through 2008. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What does 35-50mm offset mean for the 2001 Tiburon?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Can I put aftermarket wheels on my 2001 Hyundai Tiburon?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2001 Hyundai Tiburon?
The OEM offset for the 2001 Tiburon is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2001 Hyundai Tiburon?
The factory center bore (hub bore) for the 2001 Hyundai Tiburon is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Hyundai Tiburon is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1997-2008 (11 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 85.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2001 Hyundai Tiburon, please report it via our About page contact so we can verify and update this record.