1997 Hyundai Tiburon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Hyundai Tiburon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1997 Tiburon — Year-Specific Fitment Context
The 1997 model year marks the beginning of the Hyundai Tiburon's 5x114.3 bolt pattern era, which continued through 2008 (12 consecutive years). Wheels from any 1997–2008 Hyundai Tiburon are cross-compatible with the 1997 model.
Hyundai Tiburon Bolt Pattern by Year
The table below shows how the Tiburon's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1997 | 5x114.3 | 67.1 | 35-50 |
| 1998 | 5x114.3 | 67.1 | 35-50 |
| 1999 | 5x114.3 | 67.1 | 35-50 |
| 2000 | 5x114.3 | 67.1 | 35-50 |
| 2001 | 5x114.3 | 67.1 | 35-50 |
| 2003 | 5x114.3 | 67.1 | 35-50 |
| 2004 | 5x114.3 | 67.1 | 35-50 |
| 2005 | 5x114.3 | 67.1 | 35-50 |
| 2006 | 5x114.3 | 67.1 | 35-50 |
| 2007 | 5x114.3 | 67.1 | 35-50 |
| 2008 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1997 Hyundai Tiburon
For your 1997 Hyundai Tiburon, the 5x114.3 bolt pattern is shared with 1997–2008 models, but the 67.1mm center bore is critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 35–50mm; deviations risk rubbing or bearing damage. Always use 12x1.5 lug nuts with the correct seat (cone or ball) matching your wheel—mismatched seats cause loosening. Re-torque after 50–100 miles. Avoid wheels with offset below 35mm (poke) or above 50mm (fender contact).
Historical Fitment Data Reference
In our dataset, Hyundai Tiburon appears from 1997 to 2008 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (67.1mm ID to wheel bore) for aftermarket wheels to avoid vibrations.
- ✅ Re-torque lug nuts to 80–90 ft-lb after 50–100 miles of driving.
- ✅ Verify wheel offset with a test fit; 35mm offset may require fender rolling for wider tires.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Hyundai Tiburon — Frequently Asked Questions
What is the bolt pattern for a 1997 Hyundai Tiburon?
The 1997 Hyundai Tiburon uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Tiburon have the same bolt pattern as the 1997?
The Hyundai Tiburon uses the 5x114.3 pattern from 1997 through 2008. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What lug nut size does the 1997 Hyundai Tiburon use?
The 1997 Hyundai Tiburon uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 35-50mm offset mean for the 1997 Tiburon?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What is the center bore of a 1997 Hyundai Tiburon?
The factory center bore (hub bore) for the 1997 Hyundai Tiburon is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 1997 Hyundai Tiburon?
The OEM offset for the 1997 Tiburon is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset