1999 Hyundai Tiburon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Hyundai Tiburon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1999 Tiburon — Year-Specific Fitment Context
The 1999 Hyundai Tiburon is in year 3 of 12 using the 5x114.3 pattern (1997–2008). Wheels from any 1997–2008 Hyundai Tiburon are cross-compatible with the 1999 model.
Hyundai Tiburon Bolt Pattern by Year
The table below shows how the Tiburon's wheel specifications have changed over the years. The 1999 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x114.3 | 67.1 | 35-50 |
| 1998 | 5x114.3 | 67.1 | 35-50 |
| ▸ 1999 | 5x114.3 | 67.1 | 35-50 |
| 2000 | 5x114.3 | 67.1 | 35-50 |
| 2001 | 5x114.3 | 67.1 | 35-50 |
| 2003 | 5x114.3 | 67.1 | 35-50 |
| 2004 | 5x114.3 | 67.1 | 35-50 |
| 2005 | 5x114.3 | 67.1 | 35-50 |
| 2006 | 5x114.3 | 67.1 | 35-50 |
| 2007 | 5x114.3 | 67.1 | 35-50 |
| 2008 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1999 Hyundai Tiburon
For your 1999 Hyundai Tiburon, the critical center bore is 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibrations and ensure proper load transfer. The offset range is 35-50mm; staying within this avoids rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—conical (60-degree) or ball seat—matching the wheel's design. Incorrect lug nuts can cause wheel separation. Verify that aftermarket wheels are load-rated for your vehicle's weight. Proper fitment ensures safety and performance.
Historical Fitment Data Reference
In our dataset, Hyundai Tiburon appears from 1997 to 2008 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Check for caliper clearance when using wheels with offset near 35mm, as the Tiburon's front brakes are tight.
- ✅ Avoid wheels with a center bore larger than 67.1mm without hub-centric rings; vibration and stud stress can result.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Hyundai Tiburon — Frequently Asked Questions
What is the bolt pattern for a 1999 Hyundai Tiburon?
The 1999 Hyundai Tiburon uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Tiburon have the same bolt pattern as the 1999?
The Hyundai Tiburon uses the 5x114.3 pattern from 1997 through 2008. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1999 Hyundai Tiburon?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Will wheels from another Hyundai fit my 1999 Tiburon?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I use spacers on my 1999 Hyundai Tiburon?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the factory wheel offset for a 1999 Hyundai Tiburon?
The OEM offset for the 1999 Tiburon is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset