2000 INFINITI I Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 INFINITI I, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 I — Year-Specific Fitment Context
The 2000 INFINITI I is in year 5 of 9 using the 5x114.3 pattern (1996–2004). Wheels from any 1996–2004 INFINITI I are cross-compatible with the 2000 model.
INFINITI I Bolt Pattern by Year
The table below shows how the I's wheel specifications have changed over the years. The 2000 model year is highlighted.
Fitment Notes
The 2000 INFINITI I has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, INFINITI I appears from 1996 to 2004 (9 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2000 INFINITI I — Frequently Asked Questions
What is the bolt pattern for a 2000 INFINITI I?
The 2000 INFINITI I uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI I have the same bolt pattern as the 2000?
The INFINITI I uses the 5x114.3 pattern from 1996 through 2004. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2000 INFINITI I?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2000 INFINITI I?
The factory center bore (hub bore) for the 2000 INFINITI I is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2000 INFINITI I?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 I, the PCD is 5x114.3.
Can I use spacers on my 2000 INFINITI I?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
INFINITI I is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1996-2004 (9 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 90.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 INFINITI I, please report it via our About page contact so we can verify and update this record.