2013 INFINITI JX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 INFINITI JX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 JX — Year-Specific Fitment Context
The 2013 is the only model year of the INFINITI JX in our database using the 5x114.3 bolt pattern.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2013 INFINITI JX
For the 2013 INFINITI JX, the bolt pattern is 5x114.3 with a critical center bore of 66.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is tight at 40-50mm; deviating can cause rubbing or clearance issues. Always use the correct lug nuts: 12x1.25 thread pitch with a conical (60-degree) or ball seat, matching the wheel's design. Improper seating can lead to wheel loss. Verify fitment with a test fit before final installation.
Historical Fitment Data Reference
In our dataset, INFINITI JX appears from 2013 to 2013 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 66.1mm bore is specific to this model.
- ✅ Check inner clearance for aftermarket wheels; the JX has limited space near the strut and brake caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 INFINITI JX — Frequently Asked Questions
What is the bolt pattern for a 2013 INFINITI JX?
The 2013 INFINITI JX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What is the center bore of a 2013 INFINITI JX?
The factory center bore (hub bore) for the 2013 INFINITI JX is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2013 INFINITI JX use?
The 2013 INFINITI JX uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 40-50mm offset mean for the 2013 JX?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
Will wheels from another INFINITI fit my 2013 JX?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
How do I measure the bolt pattern on my 2013 INFINITI?
The 2013 JX uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset