1997 Isuzu Rodeo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Isuzu Rodeo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
1997 Rodeo — Year-Specific Fitment Context
The 1997 Isuzu Rodeo is in year 6 of 13 using the 6x139.7 pattern (1992–2004). Wheels from any 1992–2004 Isuzu Rodeo are cross-compatible with the 1997 model.
Isuzu Rodeo Bolt Pattern by Year
The table below shows how the Rodeo's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 100.1 | 38 |
| 1993 | 6x139.7 | 100.1 | 38 |
| 1994 | 6x139.7 | 100.1 | 38 |
| 1995 | 6x139.7 | 100.1 | 38 |
| 1996 | 6x139.7 | 100.1 | 38 |
| ▸ 1997 | 6x139.7 | 100.1 | 38 |
| 1998 | 6x139.7 | 100.1 | 38 |
| 1999 | 6x139.7 | 100.1 | 38 |
| 2000 | 6x139.7 | 100.1 | 38 |
| 2001 | 6x139.7 | 100.1 | 38 |
| 2002 | 6x139.7 | 100.1 | 38 |
| 2003 | 6x139.7 | 100.1 | 38 |
| 2004 | 6x139.7 | 100.1 | 38 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 1997 Isuzu Rodeo
For your 1997 Isuzu Rodeo, the 6x139.7 bolt pattern is shared across 1992–2004 models, but center bore is critical: 100.1mm. Aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not lugs. Offset is sensitive; stock is 38mm. Sticking within ±10mm maintains proper scrub radius and clearance. Lug nuts must be 12x1.5 with a 60-degree conical seat; using incorrect seat type (e.g., ball seat) can cause loosening or damage. Always verify wheel bore and lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, Isuzu Rodeo appears from 1992 to 2004 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles to 90-100 ft-lbs; the factory spec is 87 ft-lbs.
- ✅ Avoid wheels with offset below 28mm (too aggressive) as they may rub suspension components or fenders.
- ✅ Check for clearance with the brake calipers; some aftermarket wheels require spacers or have insufficient clearance.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Isuzu Rodeo — Frequently Asked Questions
What is the bolt pattern for a 1997 Isuzu Rodeo?
The 1997 Isuzu Rodeo uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 38mm.
What other years of Isuzu Rodeo have the same bolt pattern as the 1997?
The Isuzu Rodeo uses the 6x139.7 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1997 Isuzu Rodeo?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 100.1mm center bore important for the 1997 Rodeo?
The 100.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 1997 Isuzu Rodeo?
The factory center bore (hub bore) for the 1997 Isuzu Rodeo is 100.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 1997 Isuzu Rodeo?
The OEM offset for the 1997 Rodeo is typically around 38mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset