2000 Isuzu Rodeo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Isuzu Rodeo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2000 Rodeo — Year-Specific Fitment Context
The 2000 Isuzu Rodeo is in year 9 of 13 using the 6x139.7 pattern (1992–2004). Wheels from any 1992–2004 Isuzu Rodeo are cross-compatible with the 2000 model.
Isuzu Rodeo Bolt Pattern by Year
The table below shows how the Rodeo's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 100.1 | 38 |
| 1993 | 6x139.7 | 100.1 | 38 |
| 1994 | 6x139.7 | 100.1 | 38 |
| 1995 | 6x139.7 | 100.1 | 38 |
| 1996 | 6x139.7 | 100.1 | 38 |
| 1997 | 6x139.7 | 100.1 | 38 |
| 1998 | 6x139.7 | 100.1 | 38 |
| 1999 | 6x139.7 | 100.1 | 38 |
| ▸ 2000 | 6x139.7 | 100.1 | 38 |
| 2001 | 6x139.7 | 100.1 | 38 |
| 2002 | 6x139.7 | 100.1 | 38 |
| 2003 | 6x139.7 | 100.1 | 38 |
| 2004 | 6x139.7 | 100.1 | 38 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2000 Isuzu Rodeo
The 2000 Isuzu Rodeo uses a 6x139.7 bolt pattern with a 100.1mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely, preventing vibrations and load stress. The factory offset is 38mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: 12x1.5 thread pitch with a conical (60-degree) seat. Using incorrect seat type (e.g., ball seat) can lead to wheel loosening. For lifted or lowered vehicles, offset adjustments may be necessary. Wheels from 1992–2004 Rodeos are direct fit.
Historical Fitment Data Reference
In our dataset, Isuzu Rodeo appears from 1992 to 2004 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90-100 ft-lbs after 50 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations may occur.
- ✅ Check inner clearance for brake calipers and suspension components when changing offset.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Isuzu Rodeo — Frequently Asked Questions
What is the bolt pattern for a 2000 Isuzu Rodeo?
The 2000 Isuzu Rodeo uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 38mm.
What other years of Isuzu Rodeo have the same bolt pattern as the 2000?
The Isuzu Rodeo uses the 6x139.7 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2000 Isuzu Rodeo?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2000 Isuzu Rodeo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Rodeo, the PCD is 6x139.7.
Do 2000 Isuzu Rodeos use lug bolts or lug nuts?
The 2000 Rodeo requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2000 Isuzu Rodeo?
The OEM offset for the 2000 Rodeo is typically around 38mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset