2004 Isuzu Rodeo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Isuzu Rodeo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2004 Rodeo — Year-Specific Fitment Context
The 2004 model year is the final year of the Isuzu Rodeo's 6x139.7 bolt pattern run (since 1992). Wheels from any 1992–2004 Isuzu Rodeo are cross-compatible with the 2004 model.
Isuzu Rodeo Bolt Pattern by Year
The table below shows how the Rodeo's wheel specifications have changed over the years. The 2004 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 100.1 | 38 |
| 1993 | 6x139.7 | 100.1 | 38 |
| 1994 | 6x139.7 | 100.1 | 38 |
| 1995 | 6x139.7 | 100.1 | 38 |
| 1996 | 6x139.7 | 100.1 | 38 |
| 1997 | 6x139.7 | 100.1 | 38 |
| 1998 | 6x139.7 | 100.1 | 38 |
| 1999 | 6x139.7 | 100.1 | 38 |
| 2000 | 6x139.7 | 100.1 | 38 |
| 2001 | 6x139.7 | 100.1 | 38 |
| 2002 | 6x139.7 | 100.1 | 38 |
| 2003 | 6x139.7 | 100.1 | 38 |
| ▸ 2004 | 6x139.7 | 100.1 | 38 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2004 Isuzu Rodeo
For your 2004 Isuzu Rodeo, the bolt pattern is 6x139.7mm, center bore 100.1mm, and offset 38mm. The center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; staying within ±5mm of 38mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone seat). Using incorrect lug nuts can cause wheel loosening or damage. Wheels from 1992–2004 Rodeos are direct fit.
Historical Fitment Data Reference
In our dataset, Isuzu Rodeo appears from 1992 to 2004 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance when using aftermarket wheels; some designs may interfere.
- ✅ Avoid using wheels with a center bore larger than 100.1mm without hub-centric rings.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Isuzu Rodeo — Frequently Asked Questions
What is the bolt pattern for a 2004 Isuzu Rodeo?
The 2004 Isuzu Rodeo uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 38mm.
What other years of Isuzu Rodeo have the same bolt pattern as the 2004?
The Isuzu Rodeo uses the 6x139.7 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2004 Isuzu Rodeo?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 38mm, and a center bore of at least 100.1mm (using hub rings if larger).
What is the center bore of a 2004 Isuzu Rodeo?
The factory center bore (hub bore) for the 2004 Isuzu Rodeo is 100.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2004 Isuzu Rodeo use?
The 2004 Isuzu Rodeo uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2004 Isuzu Rodeo?
The OEM offset for the 2004 Rodeo is typically around 38mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset