1995 Isuzu Rodeo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Isuzu Rodeo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
1995 Rodeo — Year-Specific Fitment Context
The 1995 Isuzu Rodeo is in year 4 of 13 using the 6x139.7 pattern (1992–2004). Wheels from any 1992–2004 Isuzu Rodeo are cross-compatible with the 1995 model.
Isuzu Rodeo Bolt Pattern by Year
The table below shows how the Rodeo's wheel specifications have changed over the years. The 1995 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 100.1 | 38 |
| 1993 | 6x139.7 | 100.1 | 38 |
| 1994 | 6x139.7 | 100.1 | 38 |
| ▸ 1995 | 6x139.7 | 100.1 | 38 |
| 1996 | 6x139.7 | 100.1 | 38 |
| 1997 | 6x139.7 | 100.1 | 38 |
| 1998 | 6x139.7 | 100.1 | 38 |
| 1999 | 6x139.7 | 100.1 | 38 |
| 2000 | 6x139.7 | 100.1 | 38 |
| 2001 | 6x139.7 | 100.1 | 38 |
| 2002 | 6x139.7 | 100.1 | 38 |
| 2003 | 6x139.7 | 100.1 | 38 |
| 2004 | 6x139.7 | 100.1 | 38 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 1995 Isuzu Rodeo
For your 1995 Isuzu Rodeo, the 6x139.7 bolt pattern is shared with 1992–2004 models, but critical dimensions vary. The center bore is 100.1mm—aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive; stock is 38mm. Going lower (e.g., 25mm) pushes wheels outward, risking fender rub; higher offset (e.g., 50mm) may contact suspension. Always use 12x1.5 lug nuts with the correct seat (cone seat for most aftermarket wheels; ball seat for some OEM). Improper seating can cause loosening. Re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Isuzu Rodeo appears from 1992 to 2004 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90-100 ft-lbs after 50 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 100.1mm; outer diameter must match wheel bore.
- ✅ Avoid spacers unless hub-centric; they alter offset and may require longer studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Isuzu Rodeo — Frequently Asked Questions
What is the bolt pattern for a 1995 Isuzu Rodeo?
The 1995 Isuzu Rodeo uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 38mm.
What other years of Isuzu Rodeo have the same bolt pattern as the 1995?
The Isuzu Rodeo uses the 6x139.7 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What lug nut size does the 1995 Isuzu Rodeo use?
The 1995 Isuzu Rodeo uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Isuzu fit my 1995 Rodeo?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.1mm.
How do I measure the bolt pattern on my 1995 Isuzu?
The 1995 Rodeo uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 1995 Isuzu Rodeo?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 100.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset