2000 Jaguar S-Type Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Jaguar S-Type, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | M 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 S-Type — Year-Specific Fitment Context
The 2000 model year marks the beginning of the Jaguar S-Type's 5x108 bolt pattern era, which continued through 2008 (9 consecutive years). Wheels from any 2000–2008 Jaguar S-Type are cross-compatible with the 2000 model.
Jaguar S-Type Bolt Pattern by Year
The table below shows how the S-Type's wheel specifications have changed over the years. The 2000 model year is highlighted.
Fitment Notes
The 2000 Jaguar S-Type has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Jaguar S-Type appears from 2000 to 2008 (9 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2000 Jaguar S-Type — Frequently Asked Questions
What is the bolt pattern for a 2000 Jaguar S-Type?
The 2000 Jaguar S-Type uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Jaguar S-Type have the same bolt pattern as the 2000?
The Jaguar S-Type uses the 5x108 pattern from 2000 through 2008. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2000 Jaguar S-Type?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 45mm, and a center bore of at least 63.4mm (using hub rings if larger).
Why is matching the 63.4mm center bore important for the 2000 S-Type?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2000 Jaguar S-Type?
The OEM offset for the 2000 S-Type is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 45mm offset mean for the 2000 S-Type?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Jaguar.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Jaguar S-Type is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2000-2008 (9 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Jaguar S-Type, please report it via our About page contact so we can verify and update this record.