2004 Jaguar S-Type Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Jaguar S-Type, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | M 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 S-Type — Year-Specific Fitment Context
The 2004 Jaguar S-Type is in year 5 of 9 using the 5x108 pattern (2000–2008). Wheels from any 2000–2008 Jaguar S-Type are cross-compatible with the 2004 model.
Jaguar S-Type Bolt Pattern by Year
The table below shows how the S-Type's wheel specifications have changed over the years. The 2004 model year is highlighted.
Fitment Notes
The 2004 Jaguar S-Type has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Jaguar S-Type appears from 2000 to 2008 (9 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2004 Jaguar S-Type — Frequently Asked Questions
What is the bolt pattern for a 2004 Jaguar S-Type?
The 2004 Jaguar S-Type uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Jaguar S-Type have the same bolt pattern as the 2004?
The Jaguar S-Type uses the 5x108 pattern from 2000 through 2008. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
What is the factory wheel offset for a 2004 Jaguar S-Type?
The OEM offset for the 2004 S-Type is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2004 Jaguar S-Type use?
The 2004 Jaguar S-Type uses M 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2004 Jaguar S-Type?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your M 12x1.50 hardware.
What is the PCD for a 2004 Jaguar S-Type?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2004 S-Type, the PCD is 5x108.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Jaguar S-Type is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2000-2008 (9 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2004 Jaguar S-Type, please report it via our About page contact so we can verify and update this record.