2026 Polestar 3 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Polestar 3 is 5x108. It has a center bore of 63.4 mm, an offset range of 40-50, and utilizes 14x1.5 (Ball seat, 21mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Polestar 3 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Center Bore (Hub Bore) | 63.4 mm |
| Offset Range (ET) | 40-50 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 3 — Year-Specific Fitment Context
The 2026 model year is the final year of the Polestar 3's 5x108 bolt pattern run (since 2023). Wheels from any 2023–2026 Polestar 3 are cross-compatible with the 2026 model.
Polestar 3 Bolt Pattern by Year
Looking for all generations? View the complete Polestar 3 (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the 3's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Polestar 3 Wheel Interchange & Donor Fitment Guide (5x108)
The 5x108 bolt pattern is shared by 606 vehicles in our database (common). For safe wheel swaps on the 2026 Polestar 3, donor rims must match the 5x108 PCD and have a center bore of at least 63.4 mm:
DIRECT HUB MATCH Same 5x108 Pattern & Exact 63.4mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2019 Volvo XC60 | 63.3 mm (Exact) | 50,5 | B 14x1.50 (Cone) |
| 2009 Volvo XC70 | 63.4 mm (Exact) | 50 | B 14x1.50 (Cone) |
| 2016 Volvo XC90 | 63.4 mm (Exact) | 38,5 | B 14x1.50 (Cone) |
| 2025 Ford Bronco Sport | 63.4 mm (Exact) | 35-45 | 12x1.5 (Ball) |
| 2017 Ford C-MAX Energi | 63.4 mm (Exact) | 51 | N 12x1.50 (Cone) |
| 2018 Ford C-MAX Hybrid | 63.3 mm (Exact) | 40-55mm | M12x1.5 (Cone) |
HUB RING FITMENT Same 5x108 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1996 Volvo 850 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 2016 Volvo S80 | 65.1 mm | 65.1mm → 63.4mm |
52,5 |
| 1992 Lincoln Continental | 70.5 mm | 70.5mm → 63.4mm |
40 |
| 2005 Maserati GranSport | 67.1 mm | 67.1mm → 63.4mm |
53 |
| 1992 Volvo 240 | 65.1 mm | 65.1mm → 63.4mm |
25 |
| 1998 Volvo C70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Polestar 3 — Frequently Asked Questions
What is the bolt pattern for a 2026 Polestar 3?
The 2026 Polestar 3 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 40-50mm.
What other years of Polestar 3 have the same bolt pattern as the 2026?
The Polestar 3 uses the 5x108 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Will wheels from another Polestar fit my 2026 3?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
What lug nut size does the 2026 Polestar 3 use?
The 2026 Polestar 3 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2026 Polestar 3?
The OEM offset for the 2026 3 is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2026 Polestar 3s use lug bolts or lug nuts?
The 2026 3 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →