2024 Polestar 3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Polestar 3, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 3 — Year-Specific Fitment Context
The 2024 model year is the final year of the Polestar 3's 5x108 bolt pattern run (since 2023). Wheels from any 2023–2024 Polestar 3 are cross-compatible with the 2024 model.
Polestar 3 Bolt Pattern by Year
The table below shows how the 3's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2023 | 5x108 | 63.4 | 35-45mm |
| ▸ 2024 | 5x108 | 63.4 | 35-45mm |
Fitment Notes
The 2024 Polestar 3 has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Polestar 3 appears from 2023 to 2024 (2 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2024 Polestar 3 — Frequently Asked Questions
What is the bolt pattern for a 2024 Polestar 3?
The 2024 Polestar 3 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 35-45mmmm.
What other years of Polestar 3 have the same bolt pattern as the 2024?
The Polestar 3 uses the 5x108 pattern from 2023 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2024 Polestar 3?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 63.4mm (using hub rings if larger).
What is the factory wheel offset for a 2024 Polestar 3?
The OEM offset for the 2024 3 is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Polestar fit my 2024 3?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
What lug nut size does the 2024 Polestar 3 use?
The 2024 Polestar 3 uses M14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Polestar 3 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2023-2024 (2 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2024 Polestar 3, please report it via our About page contact so we can verify and update this record.