2019 Jaguar XE Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Jaguar XE, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | M 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 XE — Year-Specific Fitment Context
The 2019 Jaguar XE is in year 3 of 4 using the 5x108 pattern (2017–2020). Wheels from any 2017–2020 Jaguar XE are cross-compatible with the 2019 model.
Jaguar XE Bolt Pattern by Year
The table below shows how the XE's wheel specifications have changed over the years. The 2019 model year is highlighted.
Fitment Notes
The 2019 Jaguar XE has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Jaguar XE appears from 2017 to 2020 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2019 Jaguar XE — Frequently Asked Questions
What is the bolt pattern for a 2019 Jaguar XE?
The 2019 Jaguar XE uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Jaguar XE have the same bolt pattern as the 2019?
The Jaguar XE uses the 5x108 pattern from 2017 through 2020. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What lug nut size does the 2019 Jaguar XE use?
The 2019 Jaguar XE uses M 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2019 Jaguar XE?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 XE, the PCD is 5x108.
What is the factory wheel offset for a 2019 Jaguar XE?
The OEM offset for the 2019 XE is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 45mm offset mean for the 2019 XE?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Jaguar.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Jaguar XE is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2017-2020 (4 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 5.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2019 Jaguar XE, please report it via our About page contact so we can verify and update this record.