2017 Jaguar XE Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Jaguar XE, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | M 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2017 XE — Year-Specific Fitment Context
The 2017 model year marks the beginning of the Jaguar XE's 5x108 bolt pattern era, which continued through 2020 (4 consecutive years). Wheels from any 2017–2020 Jaguar XE are cross-compatible with the 2017 model.
Jaguar XE Bolt Pattern by Year
The table below shows how the XE's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2017 Jaguar XE
For the 2017 Jaguar XE, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels must have a bore ≥63.4mm; use hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut seat type: the XE uses a 60-degree conical seat (not ball seat). Using incorrect lug nuts can lead to wheel detachment. Stick to M12x1.50 thread pitch. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Jaguar XE appears from 2017 to 2020 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheel bore exceeds 63.4mm to avoid vibration.
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50 miles of driving.
- ✅ Avoid wheels with offset below 40mm or above 50mm to prevent rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Jaguar XE — Frequently Asked Questions
What is the bolt pattern for a 2017 Jaguar XE?
The 2017 Jaguar XE uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Jaguar XE have the same bolt pattern as the 2017?
The Jaguar XE uses the 5x108 pattern from 2017 through 2020. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2017 Jaguar?
The 2017 XE uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2017 Jaguar XE?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 XE, the PCD is 5x108.
What is the factory wheel offset for a 2017 Jaguar XE?
The OEM offset for the 2017 XE is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2017 Jaguar XE?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your M 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset