2007 Kia Rio Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Kia Rio, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Rio — Year-Specific Fitment Context
The 2007 Kia Rio is in year 7 of 17 using the 4x100 pattern (2001–2017). Wheels from any 2001–2017 Kia Rio are cross-compatible with the 2007 model. Across its full production run (2001–2023), the Rio has also used: 5x114.3.
Kia Rio Bolt Pattern by Year
The table below shows how the Rio's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 4x100 | 54.1 | 45 |
| 2002 | 4x100 | 54.1 | 45 |
| 2003 | 4x100 | 54.1 | 45 |
| 2004 | 4x100 | 54.1 | 45 |
| 2005 | 4x100 | 54.1 | 45 |
| 2006 | 4x100 | 54.1 | 46 |
| ▸ 2007 | 4x100 | 54.1 | 46 |
| 2008 | 4x100 | 54.1 | 46 |
| 2009 | 4x100 | 54.1 | 46 |
| 2010 | 4x100 | 54.1 | 46 |
| 2011 | 4x100 | 54.1 | 46 |
| 2012 | 4x100 | 54.1 | 46 |
| 2013 | 4x100 | 54.1 | 46 |
| 2014 | 4x100 | 54.1 | 46 |
| 2015 | 4x100 | 54.1 | 46 |
| 2016 | 4x100 | 54.1 | 46 |
| 2017 | 4x100 | 54.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2007 Kia Rio
For your 2007 Kia Rio, the bolt pattern is 4x100 with a center bore of 54.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The offset is critical; the factory spec is 46mm, but a range of 38–50mm is acceptable for proper clearance. Always verify lug nut thread pitch: 12x1.50. Use conical (60-degree) seat lug nuts unless your wheels specify ball seat. Failure to match these specs can lead to wheel separation. Wheels from 2001–2017 Kia Rio models are cross-compatible. Note that later Rio models (2018+) use a 5x114.3 pattern, so they are not compatible.
Historical Fitment Data Reference
In our dataset, Kia Rio appears from 2001 to 2023 (23 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lb after 50 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 54.1mm bore is small and requires precise centering.
- ✅ Check brake caliper clearance when using wheels with offset below 38mm; the Rio's front brakes are tight.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Kia Rio — Frequently Asked Questions
What is the bolt pattern for a 2007 Kia Rio?
The 2007 Kia Rio uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 46mm.
What other years of Kia Rio have the same bolt pattern as the 2007?
The Kia Rio uses the 4x100 pattern from 2001 through 2017. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Will wheels from another Kia fit my 2007 Rio?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 54.1mm.
Can I put aftermarket wheels on my 2007 Kia Rio?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 54.1mm (using hub rings if larger).
What is the center bore of a 2007 Kia Rio?
The factory center bore (hub bore) for the 2007 Kia Rio is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2007 Kia Rio?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset