2019 Kia Rio Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Kia Rio, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Rio — Year-Specific Fitment Context
The 2019 Kia Rio is in year 2 of 6 using the 5x114.3 pattern (2018–2023). Wheels from any 2018–2023 Kia Rio are cross-compatible with the 2019 model. Across its full production run (2001–2023), the Rio has also used: 4x100.
Kia Rio Bolt Pattern by Year
The table below shows how the Rio's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 4x100 | 54.1 | 45 |
| 2002 | 4x100 | 54.1 | 45 |
| 2003 | 4x100 | 54.1 | 45 |
| 2004 | 4x100 | 54.1 | 45 |
| 2005 | 4x100 | 54.1 | 45 |
| 2006 | 4x100 | 54.1 | 46 |
| 2007 | 4x100 | 54.1 | 46 |
| 2008 | 4x100 | 54.1 | 46 |
| 2009 | 4x100 | 54.1 | 46 |
| 2010 | 4x100 | 54.1 | 46 |
| 2011 | 4x100 | 54.1 | 46 |
| 2012 | 4x100 | 54.1 | 46 |
| 2013 | 4x100 | 54.1 | 46 |
| 2014 | 4x100 | 54.1 | 46 |
| 2015 | 4x100 | 54.1 | 46 |
| 2016 | 4x100 | 54.1 | 46 |
| 2017 | 4x100 | 54.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| ▸ 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Kia Rio
The 2019 Kia Rio uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations and ensure proper load distribution. The recommended offset range is 35-50mm; staying within this range maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat—to guarantee safe clamping force. Mismatched lug nuts can lead to wheel loosening. For optimal safety, verify all specifications before installation.
Historical Fitment Data Reference
In our dataset, Kia Rio appears from 2001 to 2023 (23 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is critical for proper centering.
- ✅ Double-check offset: going below 35mm may cause tire rub on suspension components, while above 50mm can lead to inner clearance issues.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Kia Rio — Frequently Asked Questions
What is the bolt pattern for a 2019 Kia Rio?
The 2019 Kia Rio uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Rio have the same bolt pattern as the 2019?
The Kia Rio uses the 5x114.3 pattern from 2018 through 2023. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the center bore of a 2019 Kia Rio?
The factory center bore (hub bore) for the 2019 Kia Rio is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2019 Kia Rio?
The OEM offset for the 2019 Rio is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2019 Kia?
The 2019 Rio uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2019 Kia Rio?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Rio, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset