2013 Kia Rio Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Kia Rio, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 Rio — Year-Specific Fitment Context
The 2013 Kia Rio is in year 13 of 17 using the 4x100 pattern (2001–2017). Wheels from any 2001–2017 Kia Rio are cross-compatible with the 2013 model. Across its full production run (2001–2023), the Rio has also used: 5x114.3.
Kia Rio Bolt Pattern by Year
The table below shows how the Rio's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 4x100 | 54.1 | 45 |
| 2002 | 4x100 | 54.1 | 45 |
| 2003 | 4x100 | 54.1 | 45 |
| 2004 | 4x100 | 54.1 | 45 |
| 2005 | 4x100 | 54.1 | 45 |
| 2006 | 4x100 | 54.1 | 46 |
| 2007 | 4x100 | 54.1 | 46 |
| 2008 | 4x100 | 54.1 | 46 |
| 2009 | 4x100 | 54.1 | 46 |
| 2010 | 4x100 | 54.1 | 46 |
| 2011 | 4x100 | 54.1 | 46 |
| 2012 | 4x100 | 54.1 | 46 |
| ▸ 2013 | 4x100 | 54.1 | 46 |
| 2014 | 4x100 | 54.1 | 46 |
| 2015 | 4x100 | 54.1 | 46 |
| 2016 | 4x100 | 54.1 | 46 |
| 2017 | 4x100 | 54.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2013 Kia Rio
For the 2013 Kia Rio, the bolt pattern is 4x100 with a center bore of 54.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is critical: stick to 46mm ±5mm to avoid rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) seat lug nuts for aftermarket wheels; ball seat is factory. Never mix seat types. Re-torque after 50-100 miles. Wheels from 2001-2017 Rio models are cross-compatible, but avoid 5x114.3 pattern wheels without adapters.
Historical Fitment Data Reference
In our dataset, Kia Rio appears from 2001 to 2023 (23 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, always install hub-centric rings (54.1mm bore) to prevent vibrations.
- ✅ Double-check that aftermarket wheels have a 60-degree conical seat; factory wheels use ball seat—do not mix.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Kia Rio — Frequently Asked Questions
What is the bolt pattern for a 2013 Kia Rio?
The 2013 Kia Rio uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 46mm.
What other years of Kia Rio have the same bolt pattern as the 2013?
The Kia Rio uses the 4x100 pattern from 2001 through 2017. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What is the PCD for a 2013 Kia Rio?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 Rio, the PCD is 4x100.
What is the center bore of a 2013 Kia Rio?
The factory center bore (hub bore) for the 2013 Kia Rio is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Kia fit my 2013 Rio?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 54.1mm.
Can I use spacers on my 2013 Kia Rio?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 54.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset