2009 Kia Sedona Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Kia Sedona, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 92.2 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2009 Sedona — Year-Specific Fitment Context
The 2009 Kia Sedona is in year 3 of 9 using the 6x139.7 pattern (2007–2015). Wheels from any 2007–2015 Kia Sedona are cross-compatible with the 2009 model. Across its full production run (2002–2021), the Sedona has also used: 5x114.3.
Kia Sedona Bolt Pattern by Year
The table below shows how the Sedona's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 6x139.7 | 92.2 | 46 |
| 2008 | 6x139.7 | 92.2 | 46 |
| ▸ 2009 | 6x139.7 | 92.2 | 46 |
| 2010 | 6x139.7 | 92.2 | 46 |
| 2011 | 6x139.7 | 92.2 | 46 |
| 2012 | 6x139.7 | 92.2 | 46 |
| 2014 | 6x139.7 | 92.2 | 46 |
| 2015 | 6x139.7 | 92.2 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 46 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2009 Kia Sedona
For the 2009 Kia Sedona, the 6x139.7 bolt pattern is shared across 2007–2015 models, ensuring cross-compatibility. The center bore is 92.2mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. Offset is critical: the factory 46mm offset should be maintained within ±5mm to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree taper) to guarantee safe clamping. Mismatched lug nuts can cause wheel loosening or damage. Verify that aftermarket wheels are load-rated for the Sedona's weight.
Historical Fitment Data Reference
In our dataset, Kia Sedona appears from 2002 to 2021 (19 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90-100 ft-lb after 50 miles of driving to account for settling.
- ✅ Avoid using wheels from pre-2007 or post-2015 Sedona models; they use a 5x114.3 pattern and will not fit.
- ✅ Check that aftermarket wheels have a minimum load rating of 1,700 lbs per wheel to match the Sedona's GVWR.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Kia Sedona — Frequently Asked Questions
What is the bolt pattern for a 2009 Kia Sedona?
The 2009 Kia Sedona uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 92.2mm and the offset is 46mm.
What other years of Kia Sedona have the same bolt pattern as the 2009?
The Kia Sedona uses the 6x139.7 pattern from 2007 through 2015. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2009 Kia Sedona?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 46mm, and a center bore of at least 92.2mm (using hub rings if larger).
How do I measure the bolt pattern on my 2009 Kia?
The 2009 Sedona uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2009 Kia Sedonas use lug bolts or lug nuts?
The 2009 Sedona requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2009 Kia Sedona use?
The 2009 Kia Sedona uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset