2006 Kia Sedona Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Kia Sedona, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2006 Sedona — Year-Specific Fitment Context
The 2006 Kia Sedona is in year 5 of 20 using the 5x114.3 pattern (2002–2021). Wheels from any 2002–2021 Kia Sedona are cross-compatible with the 2006 model. Important: starting in 2007, Kia switched to 6x139.7 — those wheels will not fit the 2006 model. Across its full production run (2002–2021), the Sedona has also used: 6x139.7.
Kia Sedona Bolt Pattern by Year
The table below shows how the Sedona's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| ▸ 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 6x139.7 | 92.2 | 46 |
| 2008 | 6x139.7 | 92.2 | 46 |
| 2009 | 6x139.7 | 92.2 | 46 |
| 2010 | 6x139.7 | 92.2 | 46 |
| 2011 | 6x139.7 | 92.2 | 46 |
| 2012 | 6x139.7 | 92.2 | 46 |
| 2014 | 6x139.7 | 92.2 | 46 |
| 2015 | 6x139.7 | 92.2 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 46 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2006 Kia Sedona
For your 2006 Kia Sedona, the correct bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 46mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Lug nuts must be 12x1.50 with a conical (60-degree) seat—using incorrect thread pitch or seat type can cause wheel detachment. Note: 2007+ Sedona models use 6x139.7, which are incompatible. Wheels from 2002–2006 Sedona are direct fit.
Historical Fitment Data Reference
In our dataset, Kia Sedona appears from 2002 to 2021 (19 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with a center bore larger than 67.1mm without hub rings; vibrations may occur.
- ✅ Check offset carefully: lower offset (e.g., 40mm) may cause inner tire rub on suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Kia Sedona — Frequently Asked Questions
What is the bolt pattern for a 2006 Kia Sedona?
The 2006 Kia Sedona uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Kia Sedona have the same bolt pattern as the 2006?
The Kia Sedona uses the 5x114.3 pattern from 2002 through 2021. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Will 2007 Kia Sedona wheels fit a 2006 model?
No. The 2007 Kia Sedona switched to a 6x139.7 bolt pattern, which is not compatible with the 2006 model's 5x114.3. Using mismatched patterns is unsafe.
What is the center bore of a 2006 Kia Sedona?
The factory center bore (hub bore) for the 2006 Kia Sedona is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2006 Kia Sedona use?
The 2006 Kia Sedona uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 46mm offset mean for the 2006 Sedona?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Kia.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset