2010 Kia Sedona Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Kia Sedona, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 92.2 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 Sedona — Year-Specific Fitment Context
The 2010 Kia Sedona is in year 4 of 9 using the 6x139.7 pattern (2007–2015). Wheels from any 2007–2015 Kia Sedona are cross-compatible with the 2010 model. Across its full production run (2002–2021), the Sedona has also used: 5x114.3.
Kia Sedona Bolt Pattern by Year
The table below shows how the Sedona's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 6x139.7 | 92.2 | 46 |
| 2008 | 6x139.7 | 92.2 | 46 |
| 2009 | 6x139.7 | 92.2 | 46 |
| ▸ 2010 | 6x139.7 | 92.2 | 46 |
| 2011 | 6x139.7 | 92.2 | 46 |
| 2012 | 6x139.7 | 92.2 | 46 |
| 2014 | 6x139.7 | 92.2 | 46 |
| 2015 | 6x139.7 | 92.2 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 46 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
Fitment Notes
The 2010 Kia Sedona has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Kia Sedona appears from 2002 to 2021 (19 model years).
Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2010 Kia Sedona — Frequently Asked Questions
What is the bolt pattern for a 2010 Kia Sedona?
The 2010 Kia Sedona uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 92.2mm and the offset is 46mm.
What other years of Kia Sedona have the same bolt pattern as the 2010?
The Kia Sedona uses the 6x139.7 pattern from 2007 through 2015. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Why is matching the 92.2mm center bore important for the 2010 Sedona?
The 92.2mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2010 Kia Sedona?
The OEM offset for the 2010 Sedona is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2010 Kia Sedona?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2010 Kia?
The 2010 Sedona uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Kia Sedona has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2002-2021 (19 model years).
- Observed bolt-pattern variants: 2 (5x114.3, 6x139.7).
- Observed total offset span across years: 96.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2010 Kia Sedona, please report it via our About page contact so we can verify and update this record.