2008 Kia Sedona Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Kia Sedona, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 92.2 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2008 Sedona — Year-Specific Fitment Context
The 2008 Kia Sedona is in year 2 of 9 using the 6x139.7 pattern (2007–2015). Wheels from any 2007–2015 Kia Sedona are cross-compatible with the 2008 model. Across its full production run (2002–2021), the Sedona has also used: 5x114.3.
Kia Sedona Bolt Pattern by Year
The table below shows how the Sedona's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 6x139.7 | 92.2 | 46 |
| ▸ 2008 | 6x139.7 | 92.2 | 46 |
| 2009 | 6x139.7 | 92.2 | 46 |
| 2010 | 6x139.7 | 92.2 | 46 |
| 2011 | 6x139.7 | 92.2 | 46 |
| 2012 | 6x139.7 | 92.2 | 46 |
| 2014 | 6x139.7 | 92.2 | 46 |
| 2015 | 6x139.7 | 92.2 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 46 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2008 Kia Sedona
The 2008 Kia Sedona uses a 6x139.7 bolt pattern with a 92.2mm center bore and 46mm offset. When selecting aftermarket wheels, hub-centric rings are mandatory to match the 92.2mm bore, preventing vibrations and ensuring proper load distribution. Offset sensitivity is critical: deviations beyond ±5mm from 46mm may cause rubbing or clearance issues with suspension and brake components. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical 60-degree). Improper lug nut seating can lead to wheel loosening. Verify that aftermarket wheels are load-rated for the Sedona's weight. Cross-compatible wheels from 2007–2015 Sedona models fit directly.
Historical Fitment Data Reference
In our dataset, Kia Sedona appears from 2002 to 2021 (19 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90-100 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 92.2mm without hub-centric rings; universal rings may not fit securely.
- ✅ Check offset carefully: lower offset (e.g., 35mm) pushes wheels outward, risking fender rub; higher offset (e.g., 55mm) may contact suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Kia Sedona — Frequently Asked Questions
What is the bolt pattern for a 2008 Kia Sedona?
The 2008 Kia Sedona uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 92.2mm and the offset is 46mm.
What other years of Kia Sedona have the same bolt pattern as the 2008?
The Kia Sedona uses the 6x139.7 pattern from 2007 through 2015. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the PCD for a 2008 Kia Sedona?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Sedona, the PCD is 6x139.7.
What lug nut size does the 2008 Kia Sedona use?
The 2008 Kia Sedona uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 92.2mm center bore important for the 2008 Sedona?
The 92.2mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2008 Kia Sedona?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 46mm, and a center bore of at least 92.2mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset