2020 Kia Sedona Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Kia Sedona, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Sedona — Year-Specific Fitment Context
The 2020 Kia Sedona is in year 19 of 20 using the 5x114.3 pattern (2002–2021). Wheels from any 2002–2021 Kia Sedona are cross-compatible with the 2020 model. Across its full production run (2002–2021), the Sedona has also used: 6x139.7.
Kia Sedona Bolt Pattern by Year
The table below shows how the Sedona's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 6x139.7 | 92.2 | 46 |
| 2008 | 6x139.7 | 92.2 | 46 |
| 2009 | 6x139.7 | 92.2 | 46 |
| 2010 | 6x139.7 | 92.2 | 46 |
| 2011 | 6x139.7 | 92.2 | 46 |
| 2012 | 6x139.7 | 92.2 | 46 |
| 2014 | 6x139.7 | 92.2 | 46 |
| 2015 | 6x139.7 | 92.2 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 46 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| ▸ 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Kia Sedona
For the 2020 Kia Sedona, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 35-50mm; deviations risk rubbing or clearance issues. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use conical (60-degree) seats; aftermarket wheels may require ball or conical seats. Improper lug nut seating can cause wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Kia Sedona appears from 2002 to 2021 (19 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel bore is 67.1mm or use hub-centric rings; avoid universal fitment without them.
- ✅ Check offset carefully: 35mm may rub inner suspension, 50mm may contact brake calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Kia Sedona — Frequently Asked Questions
What is the bolt pattern for a 2020 Kia Sedona?
The 2020 Kia Sedona uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Sedona have the same bolt pattern as the 2020?
The Kia Sedona uses the 5x114.3 pattern from 2002 through 2021. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2020 Kia?
The 2020 Sedona uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2020 Kia Sedona?
The OEM offset for the 2020 Sedona is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 35-50mm offset mean for the 2020 Sedona?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Kia.
What lug nut size does the 2020 Kia Sedona use?
The 2020 Kia Sedona uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset