2018 Kia Sedona Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Kia Sedona, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Sedona — Year-Specific Fitment Context
The 2018 Kia Sedona is in year 17 of 20 using the 5x114.3 pattern (2002–2021). Wheels from any 2002–2021 Kia Sedona are cross-compatible with the 2018 model. Across its full production run (2002–2021), the Sedona has also used: 6x139.7.
Kia Sedona Bolt Pattern by Year
The table below shows how the Sedona's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 6x139.7 | 92.2 | 46 |
| 2008 | 6x139.7 | 92.2 | 46 |
| 2009 | 6x139.7 | 92.2 | 46 |
| 2010 | 6x139.7 | 92.2 | 46 |
| 2011 | 6x139.7 | 92.2 | 46 |
| 2012 | 6x139.7 | 92.2 | 46 |
| 2014 | 6x139.7 | 92.2 | 46 |
| 2015 | 6x139.7 | 92.2 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| ▸ 2018 | 5x114.3 | 67.1 | 46 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Kia Sedona
The 2018 Kia Sedona uses a 5x114.3 bolt pattern with a 67.1mm center bore and 46mm offset. When selecting aftermarket wheels, hub-centric rings are essential to match the 67.1mm bore, preventing vibrations and ensuring proper load distribution. The offset is sensitive; staying within ±5mm of 46mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree taper). Mixing seat types can cause wheel loosening. Verify that aftermarket wheels are hub-centric or use compatible rings for safe fitment.
Historical Fitment Data Reference
In our dataset, Kia Sedona appears from 2002 to 2021 (19 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check that aftermarket wheels clear the brake calipers, especially on models with larger brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Kia Sedona — Frequently Asked Questions
What is the bolt pattern for a 2018 Kia Sedona?
The 2018 Kia Sedona uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Kia Sedona have the same bolt pattern as the 2018?
The Kia Sedona uses the 5x114.3 pattern from 2002 through 2021. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Will wheels from another Kia fit my 2018 Sedona?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does 46mm offset mean for the 2018 Sedona?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Kia.
What is the PCD for a 2018 Kia Sedona?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Sedona, the PCD is 5x114.3.
What is the factory wheel offset for a 2018 Kia Sedona?
The OEM offset for the 2018 Sedona is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset